iDAQ Wi-Fi Dataloggers to feature in the 2012 IET Innovation Awards

2 August 2012  |  Admin

iDAQ CU-04 WiFi Data Acquisition Unit - 4 Channel 4-20mA InputsNow available from Audon Electronics is the new iDAQ range of Wi-Fi enabled dataloggers which are shortly to be featured in the 2012 IET Innovation Awards. The iDAQ range comprises Voltage input, 4-20mA input, PT100 thermometer input and a combination voltage and pulse counter input units in both 4 and 8 channel versions.

The iDAQ range offers high resolution, high accuracy readings and are compatible with a wide range of  analogue and digital sensors. iDAQ units have Wi-Fi connectivity and incorporate a built-in web-server so no PC application software is required. Readings can be viewed in real time in tabular or chart recorder format using any tablet, PC or mobile device via a web browser. Readings can also be logged in the internal 256kb memory for download at a later date. Log rates from once every 5 seconds to every 24 hours can be set.

iDAQ can also be configured to issue email alert messages on alarm; for example, an alert could be issued if a water pipe temperature falls below a critical set-point (i.e. to prevent burst pipes etc). Another use for this alert feature is to monitor window and door contacts; an alert could be issued if they open.

The USB2.0 interface allows the user to write their own applications to control the unit or to take measurements. It also allows them to configure the unit using any third party terminal software

Application areas include:
  • Smart metering (electricity, gas and water)
  • Eco-home monitoring (central heating, humidity control, PV output, etc)
  • Environmental monitoring
  • Weather stations (iDAQ can provide live and historical weather trends)
  • Industrial temperature monitoring (supports platinum resistance temperature sensors)

For more information please visit:
Latest News
26 March 2021
26 March 2021

New Products on our website

8 November 2019
Netio Products


7 February 2019  |  Admin
Structural health monitoring with the MonoDAQ-E-gMeter MEMS accelerometer DAQ Unit

MonoDAQ-E-gMeter is an all-in-one sensor and a data acquisition device with a very low noise 3-axial MEMS accelerometer. The MonoDAQ-E-gMeter has an EtherCAT interface and DEWESoft software support. Power and signal over the same cable allows it to be distributed all over the structure that requires acceleration monitoring.

1 February 2019  |  Admin
The MonoDAQ-U-X USB Mulitifunction DAQ Unit - the Data Acquisition Chameleon

Are you looking for a Data Acquisition (DAQ) device to perform multichannel temperature, pressure, voltage or current measurements in a very limited time? Do you need to control and automate the measurement with analogue and digital output? Are you also tight on budget? If you answered yes, MonoDAQ-U-X is the right solution for you!