Home > Data Acquisition and Control > Ethernet > Web Browser Control
(Details shown apply to the default selection)
Analogue Inputs: 2Digital Inputs: 2Digital Outputs: 2Temperature Inputs: 2Humidity Inputs: 2
8 in stock, immediate despatch
TCW122B-WD is an IP watchdog monitoring module, specially designed for a failsafe monitor system. The module controls the functionality of devices or networks by transmitting or receiving respectively ICMP echo request or ICMP echo reply. The appropriate relay is activated if there isn’t an ICMP echo (ping) for certain time. This can restart the monitored device or network switch. The TCW122B-WD also has two digital and two analog inputs for geneal use.
TCW122B-WD is an IP watchdog monitoring module, specially designed for a failsafe monitor system. The module controls the functionality of devices or networks by transmitting or receiving respectively ICMP echo request or ICMP echo reply.The appropriate relay is activated if there isn’t an ICMP echo (ping) for certain time. This can restart the monitored device or network switch.
TCW122B-WD has two digital and two analog inputs. It’s two relays have normally open and normally closed contacts. For every of monitored parameters – temperature, humidity, analog voltage and status of digital input, SNMP trap can be sent on certain conditions. The relays can be activated remotely (WEB and/or SNMP) or automatically from presence/absence of ping.
The state of the relay can be changed by appropriate “ON/OFF” button. To change the state of relay for a while “Pulse” button should be pressed. Duration of the pulse is specified in “Pulse Duration” field of “I/O Setup” page.
Online Demo >> (admin, admin)
TCW12x Remote Control allows you to monitor and control your TCW122B-CM devices. Entering the IP address of your installed ethernet controller, this app will be able to display the sensor values, using SNMP protocol.
TC Monitor Software
TC Monitor is easy to use Windows application for monitoring and control of TCW products. TC Monitor can collect and display data from controllers installed in different locations (sites). The collected data is stored in SQL database and can be displayed or exported in MS Excel format for further analysis. TC Monitor has a simple web interface, which enables easy and fast configuration. Monitored parameters can be 1-wire sensors, digital and analog inputs and relay outputs.
The free version of TC Monitor provides 10 credits, this means up to 10 different parameters can be monitored and logged. More Information >>
User Manual >>
TCW Discover Utility >>
SNMP MIB Table >>
TC Monitor Manual >>
TC Monitor Download >>
TST100 - 1-wire Temperature Sensor£20.00
TSH202- 1-wire Temperature and Humidity Sensor£41.00
DTS-WM - 1-wire Temperature Sensor - Wall Mount£20.00
LD12 - Water/Flood Detector£20.00
SD283ST - Wired Smoke and Heat Detector with Siren£40.00
TST103 - 1-wire Enclosed Temperature Sensor£30.00
TSV100 - Mains On/Off Detector£30.00
TC Monitor - Monitoring and Control Software for TC Products£256.00 - £617.00
Be the first to Write a Review for this item!