Home > Remote IO Modules > WiFi Modbus/TCP
Analogue Inputs: 14Analogue Outputs: 2Digital Inputs: 20Digital Outputs: 20
1 in stock, immediate despatch
Labjack T7-PRO USB ,Ethernet and Wifi data acquisition unit with analogue and digital I/O unit for data logging, data acquisition, measurement and control applications. Kipling is available for basic configuration and testing as are a selection of free datalogging and charting software.
The LabJack T7-PRO has 14 external analogue inputs (AIN0-AIN13). AIN0-AIN3 are available on screw terminals and also on the DB37 connector. All 14 analogue inputs are available on the DB37 connector. The Mux80 multiplexer can expand this to to 80 single ended or 40 differential channels.The maximum input range is ±10 volts, with software selectable gains of x1, x10, and x100. Each analogue input can be measured single-ended, or differentially in even/odd pairs. Analogue input resolution is 16 bits at max speed (?? conversion time), increasing to 18 bits at slower speeds (?? ms conversion time). Input impedance is at least 1 G?, with typical input bias currents of only 10 nA.
Command/response (software timed) analogue input reads typically take 1-4 ms depending on number of channels and communication configuration. Hardware timed input streaming has a maximum rate that varies with resolution from 4 ksamples/s at 18 bits to 50 ksamples/s at 16 bits.
The T7-Pro has all the features of the normal U6 with the addition of an auxiliary low-speed high-resolution (24-bit) sigma-delta ADC. Analogue input resolution varies from 19.5 bits (RMS or Effective) at max speed (??? ms conversion time), to 22 bits at slower speeds (??? ms conversion time).
Up to 2 digital I/O can be configured as 32-bit counters. Since counting is one possible mode of the timers above, the T7-PRO has up to 6 counting inputs.
The Kipling configuration software for the T7-PRO provides basic test, configuration, and self-upgrade functionality in a graphical interface. The extent of the graphical interface is limited, since the software is intended as a basic tool. However, ALL T7 functionality is present within the program through the use of the register tables.
The Dashboard tab allows for simple testing in a graphical way. Change DIO from input to output by clicking the input button. Or, modify the analogue output voltage of the DAC lines with the arrow buttons. Analogue input values are displayed next to the analogue channel number.All of the values are updated about every half second on the dashboard page, and will continue unless the communication between the T7 and the computer is disrupted.
LUA Scripting for Stand-Alone Use
T7 and T7-Pro can operate without computer involvement running a LUA script. The user can now write complex control applications such as PID loops, data logging to SD card etc all from within Kipling which is then uoploaded to the T7. There are dozens of simple examples built into Kipling, so you don't have to dig around to find example code. See here for more information >>
uSD Card for Data Logging
The microSD card is only useful for people who are using scripting, since all other interactions with the T7 can be saved to the host PC hard drive. The LUA script has a host of file read/write routines included.
The T7-Pro ships with a 2GB micro SD card, RTC, and battery/battery-holder installed. The T7 has none of these, but does have the socket installed to hold an SD card.
Free Application Software
Included with the Windows installation we provide several useful applications free of charge.
DAQFactory is a low cost data acquisition and control software for SCADA, Factory Automation, HMI and Test and Measurement applications. DAQFactory provides all the tools needed to acquire data, log it, share it on a network, display it on the screen, graph it, analyse it, and automate your project. DAQFactory can communicate with just about any serial or Ethernet device using Modbus RTU, ASCII or Modbus/ TCP. It also supports a wide variety of DAQ devices including LabJack USB devices and many other DAQ cards.
More Information >>
User Manual >>
T7-PRO Start and Downloads >>
Download DAQFactory Express >>
LJTick-Resistance - 2 Channel Resistance Signal Conditioner
LJ-DIN LabJack DIN rail Mount Clip£5.00
LJTick-RelayDriver- 2 Channel Relay Driver Signal Conditioner£12.00
DB37 37-Way M/F Cable£20.00
LJTick-OutBuff - 2 Channel DAC Output Buffer£21.00
LJTick-Divider - 2 Channel Voltage Divider Signal Conditioner£23.00
LJ-CB15 Screw Terminal Board£29.00
LJTick-CurrentShunt - 2 Channel 4-20 mA current loop Signal Conditioner£40.00
LJ-CB37 - Screw Terminal Board£44.00
EI-1034 - Temperature Probe£54.00
LJTick-InAmp - 2 Channel Instrumentation Amplifier Signal Conditioner£57.00
LJTick-DAC - 14-bit Analogue Output Signal Conditioner£68.00
EI-1050 - Digital Temperature/Humidity Probe£78.00
PS12DC Power Switching Board£90.00
RB12 SSR Module Expansion Board£127.00
Be the first to Write a Review for this item!