Home > Data Acquisition and Control > Ethernet > Web Browser Control
(Details shown apply to the default selection)
Analogue Outputs: 2Digital Outputs: 6
1 in stock, immediate despatch
The TCW280 is an Ethernet control unit with 2 analogue outputs (voltage and 4-20mA), 2 relay outputs and 4 open drain outputs supporting Pulse Width Modulation. The outputs can be activated manually either from a web browser or from commands issued over the LAN or automatically on a pre-programmed timed basis. The TCW280 also supports SNMP, HTTP API, and MODBUS TCP/IP protocols.
TCW280 is an analogue output module with Ethernet interface and galvanic isolation between power supply and outputs. It has 2 analogue output channels. Every channel can work either in voltage (0/5 or 0/10V) or current loop (0/20, 4/20 or 0/24mA) mode. Generated signals have excellent stability and 12-bit resolution.
The device has also 4 digital (open drain) outputs. The digital outputs work in two modes – ON/OFF or PWM. In ON/OFF mode they can be used as a standard digital output to control devices with dry contact activation. In the PWM mode, the output can be used as an “analogue” output for appropriateprocesses – DC motor control, LED dimming, etc. The frequency in PWM mode can be up to 2 kHz.
TCW280 has also 2 relays with normally closed and normally open contacts. Both relays can be activated from the WEB interface, M2M protocol or by the schedule. The scheduling functionality offers 4 different schedules for single or repeated (weekly) tasks. The module supports MODBUS TCP/IP, SNMP, and HTTP API for M2M communication.
Online Demo >> (admin, admin)
TC Monitor Software
TC Monitor is easy to use Windows application for monitoring and control of TCW products. TC Monitor can collect and display data from controllers installed in different locations (sites). The collected data is stored in SQL database and can be displayed or exported in MS Excel format for further analysis. TC Monitor has a simple web interface, which enables easy and fast configuration. Monitored parameters can be 1-wire sensors, digital and analog inputs and relay outputs.
The free version of TC Monitor provides 10 credits, this means up to 10 different parameters can be monitored and logged. More Information >>
User Manual >>
TCW Discover Utility >>
TC Monitor Manual >>
TC Monitor Download >>
TSV100 - Mains On/Off Detector£29.00
LD12 - Water/Flood Detector£19.00
SD283ST - Wired Smoke and Heat Detector with Siren£39.00
TC Monitor - Monitoring and Control Software for TC Products£249.00 - £599.00