Home > Data Acquisition and Control > Serial > RS485 Modbus Units > Modbus-Slim
(Details shown apply to the default selection)
Digital Outputs: 16
2 in stock, immediate despatch
The MODBUS-Slim range is a cost effective solution when compact high-IO count Modbus solution is required. The MOD-16O 16 PNP High-power Transistor Outputs. Can be configured for Modbus ASCII or RTU. Programmed via USB connection.
The MOD-16O has 16 high-power PNP transistor outputs. Each channel can be individually configured in one of several modes.This module is connected to the RS485 bus with twisted-pair wire. Communication is via MODBUS RTU or MODBUS ASCII. The baud rate is configurable from 2400 to 115200.
The module is designed for mounting on a DIN rail in accordance with DIN EN 5002. The module is equipped with a set of LEDs used to indicate the status of inputs and outputs useful for diagnostic purposes and helping to find errors.
Module configuration is done via USB by using a dedicated free Modbus Configurator software. You can also change the parameters using the MODBUS protocol.
The Slim series modules can be easily connected with each other via a ribbon cable. Just connect the power and RS485 to the first module and ribbon cable connect the remaining modules to form a compact IO station without the wiring costs.
User Manual >>
Config Software >>
DR-15-24 24Vdc 0.63A PSU DIN Rail Power Supply£29.00
DAQFACTORY-LITE - 32 Tag£229.00
DAQFACTORY-BASE - 64 Tag£459.00
DAQFACTORY-PRO - Unlimited£929.00
MOD-ETH Ethernet Modbus TCP to Modbus RTU, ASCII Gateway£139.00
IDC-RIBBON Expansion Ribbon Cable£2.00 - £8.00