PAPAGO Meteo ETH: Industrial weather station with Ethernet and PoE

PAPAGO Meteo ETH: Industrial weather station with Ethernet and PoE
  Zoom
PAPAGO Meteo ETH: Industrial weather station with Ethernet and PoEPAPAGO Meteo ETH: Industrial weather station with Ethernet and PoEPAPAGO Meteo ETH: Industrial weather station with Ethernet and PoE
Our Price:  £138.00(£165.60 Inc. VAT)
+

Availability:  

  

Incoming, 1-2 days

Papago Meteo ETH can measure temperature, humidity, dew point, carbon dioxide (CO2) concentration, wind speed and wind direction. Papago Meteo ETH has ethernet interface with PoE power supply.


Papago Meteo ETH belongs to a family of Papago modules with some common properties. These are mainly the following:

  • Ethernet interface, internal website (in Czech and English) and many standard communication protocols
  • PoE power supply or an external source. PoE eliminates the need to use an external power supply.
  • Internal memory and real-time clock. Measured data including the time of measurement is automatically stored in the memory if the communication is lost. The data is automatically sent after the connection is restored.
  • Elegant but robust metal box that can be mounted on a DIN rail. The box bears descriptions that allow connection without having to consult the manual. Also LED indicators for all important states help commissioning.
  • The possibility to display, store and analyze data in the Wix, which is free of charge for a smaller number of measured parameters.

Sensors for Papago Meteo ETH

It is possible to attach up to three sensors listed below (to corresponding connectors A, B, C, sensors are not included):

  • Combined sensor: temperature (-40 to +125 °C), humidity (0 to 100 %) and dew point (connector A or B)
  • Temperature sensor: temperature (-55 to +125 °C) (connector A or B)
  • CO2 sensor (Carbon dioxide): range 0 to 2000 ppm with accuracy ±25 ppm, Non Dispersive Infrared Sensor (connector A or B)
  • Wind speed and direction sensor: speed (0.5 to 89 m/s), direction (±3°) (only connector C)

Features of Papago Meteo ETH

  • Measurements per second: 1, 2 or 5 according to the settings
  • PoE standard: IEEE 802.3af
  • Possible external power supply 11 to 58 V DC, (external power source not included, you can use this power source 15V/0,8A)
  • Typical power consumption 1.8 W
  • Package contents: Papago Meteo ETH, patch cable 1m
  • The device can send e-mails if set thresholds has been exceeded

Customer Reviews

Be the first to Write a Review for this item!