Home Page Contact Us My Basket Checkout
WirelessCOM/G10 - RS232 to GPRS/GSM
The WirelessCOM/G10 is a simple but powerful solution to enable wireless communications to your RS232 based equipment. In cases where there is a need to monitor/control/collect data from remote locations, the WirelessCom/G10 is ready-to-go solution. It acts as a transparent RS232 port. Thus you would be able to see your devices as directly connected to the computer, no matter how far you are from your devices.
Description
User Manual >> Supplied with UK PSU, CD and antenna	Provides transparent GPRS/CSD connection Receive SMS alerts when exceptions occur in device No drivers required, hence works with any device/machine/equipment/computer Simple and informative configuration menu Configurable through any terminal software Hardware reset from DTR pin (optional) Device is remotely configurable through GPRS/CSD/SMS Access only through authorized phone numbers (for CSD and SMS) Up to 5 configurable authorized phone numbers Auto PIN feature, no need to enter SIM card PIN after restart Password protected configuration Dual colour LED indication for various states of device (Up to 9 states) Supports various data formats (8N1,8N2,8E1,8O1,7E1,7O1) Firmware update possibility CHAP/PAP authentication supported
Operation
The WirelessCom/G10 is a device designed for communication with remote devices which have RS232 ports. RS232 interface is one of the industries leading standard. This interface can be found in a large variety of devices like, data loggers, POS terminals, vending machines, PLCs, control panels, various meters, switches, routers and the list goes on. It is a frequent case when such devices are present in remote locations and there is a need to monitor/control/collect data. In such cases GSM network coupled with GPRS/CSD service can provide a very reliable wireless solution
The WirelessCom/G10 is ready-to-go solution for such situations. It acts as a transparent RS232 port. Thus you would be able to see your devices as directly connected to the computer, no matter how far you are from your devices Simply connect the WirelessCom/G10 to your remote device via the RS232 interface and configure WirelessCom/G10 to connect to your server. Whenever some data arrives from your machine to the serial port, WirelessCom/G10 will connect to the configured server and make data transfer. Upon connection you can even send commands to your machine/device from your PC remotely. WirelessCom/G10 will thus transmit all the data coming on its serial port to GPRS and all the data coming from GPRS to serial port. In short it is acting as a bridge between GPRS and the serial port. In addition to GPRS you can also use CSD connection and reach your remote devices just by dialing into the SIM number of WirelessCom/G10. WirelessCom/G10 also supports SMS bearer. Using SMS you can remotely configure the settings of WirelessCom/G10. The device can act as a master, and initiate the connection to the server or it can act as a slave and wait for incoming connection.
Specifications
GSM Quad band: 850/900/1800/1900 MHz GPRS Class 10: 16-24 Kbps upload, 32-48 Kbps download CSD: Up to 9.6 Kbps SMS: Text mode RS232 interface Socket: DB9 female Data rate: Up to 115200 Data bits: 7,8 Parity: Odd, Even Flow control: No Physical DB9 Female connector for connecting to a PC (or other device). SIM card holder. 3.5 mm /1.35 mm power supply connector
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757