	Products
PC Data Acquisition and Control Ethernet • Analogue and Multifunction • Relay and Digital IO • Web Browser Control • Sensors • EDAM-9000 Range • EDAM-5000 Range Dataloggers and Chart Recorders Oscilloscopes, Test and Measurement Weather Stations IT Network Systems - Monitoring and Alarm Home Automation and GSM Control PLC's and Industrial Controllers Data Communications HMI, Panel PC's and LCD Products

	Main Menu
Home Contact Us Pay by Card Privacy Policy Terms and Conditions

NETIOM - Web Controlled IO Board

Zoom

Our Price: £99.00(Exc. 20% VAT)

Add RS232 Null Modem Cable:

+ £3.50

Analogue Inputs: 4
Digital Inputs: 16
Digital Outputs: 16

Availability:

2 in stock, immediate despatch

4 analogue inputs - 0-5V at 10-bits
16 digital inputs TTL / CMOS / dry contacts (10K ohm pull up)
16 digital open transistor outputs 50V d.c. at 50mA
Serial port with programmable baud rate
Ethernet 10 MIPS via RJ45 connector
HTTP server with 32K bytes of web space.
Web space can be password protected.
Network client. Connections triggered from input events or timed.
Generates e-mails in response to specified events.
Watchdog mode: can be used to monitor network connections.
10 MIPS ethernet interface.
Automatic detection of IP address (DHCP).
Size 110mm x 110mm
Power 12V d.c. at 50mA

Netiom is a stand-alone network aware Input / Output module which can be controlled over most networks including the Internet. It can be accessed from the Internet over a standard ADSL or other always on connection making remote monitoring and control a cost effective option

It has 16 digital and 4 analogue inputs, 16 digital outputs and an RS232 serial port, all of which can be accessed from a standard web browser. Web pages are served from its 32K bytes of on board non-volatile memory. Graphic and sound files can be served as well as static and dynamic HTML pages. Web pages may be password protected and can be fully customized. Netiom can work as a totally independent web server or as part of a larger web site.

As well as serving web pages, Netiom can be used to connect to remote servers. Connections can be established on demand in response to specified events or on a regular timed basis. Once connected, the server can have complete control over Netiom’s operation.

E-mails can be generated in response to specified events. The message and the subject may be customized and may contain the current status of all the inputs and outputs.

A watchdog mode is available which allows Netiom to monitor network connections and operate outputs when failure is detected.

Special interface software is included which can be use to configure Netiom and download web pages via a PCs serial port. Network settings can be manually set or automatically obtained from a DHCP server (usually an ADSL router).

Software

PC based software is provided to provide a graphical interface to programming Netiom via it's RS232 port.

On the opening page there are controls for loading and sending data and a logging area which will show a log of activity as well as any problems encountered. Sections are provided which cover:

Server and General parameters.
e-mail options.
Client connections.
Web page selection and downloading.

Downloads

User Manual >>

Software and Demo Webpages >>