	Products
PC Data Acquisition and Control USB • USB Multifunction • USB Digital and Relay IO • USB Oscilloscopes • USB Sensors Dataloggers and Chart Recorders Oscilloscopes, Test and Measurement Weather Stations IT Network Systems - Monitoring and Alarm Home Automation and GSM Control PLC's and Industrial Controllers Data Communications HMI, Panel PC's and LCD Products

	Main Menu
Home Contact Us Pay by Card Privacy Policy Terms and Conditions

DLP-IO20 - USB DAQ Board - 20-Channel USB Analogue, digital, temperature

Zoom

Our Price: £59.00(Exc. 20% VAT)

Analogue Inputs: 14
Digital Inputs: 17
Digital Outputs: 20

Availability:

9 in stock, immediate despatch

The DLP-IO20 Data-Acquisition Module is a low-cost, easy-to-use 20-channel data-acquisition system for measuring DC voltages in the range of 0-5 volts, driving 5-volt relays, controlling and monitoring processes. Each of the channels and relay contacts can be monitored and controlled via simple, multi-byte commands. Supplied with test application and software examples.

14 Analogue Inputs 0-5V, Up to 20Ksps Sample Rate
17 digital I/O
3 outputs with high current relay/LED drivers
Two Relay Outputs
Relay Contact rating - 4A @ 30 VDC, 0.6A @ 110 VDC and 1A @ 125 VAC
Digital Temperature Sensor Feature Supported on All Digital I/O’s (17 in total)
Two 32-Bit Interrupt-Driven Event Counters
USB Port Powered
USB 1.1- and 2.0-Compatible Interface
Small Footprint; 91mm x 48mm x 12mm
Easy-To-Use Programming Interface
Drivers available for Windows, MAC, Linux and Windows CE
Supplied with USB Lead

The DLP-IO20 Data-Acquisition Module is a low-cost, easy-to-use data-acquisition system for analyzing AC voltages, driving 5-volt relays, controlling and monitoring processes and measuring DC voltages in the range of 0-5 volts. This module provides topside wire terminal blocks for the wiring connections.

The 20 channels on the DLP-IO20 are broken down as follows: 3 outputs with high current relay/LED drivers and 17 digital I/O; 14 of which can be set to analog input mode. The DLP-IO20 also provides two latching relay contacts. Each of the channels and relay contacts can be controlled via simple, multi-byte commands. All operational power is taken from the host PC via the USB port.

The mode of each I/O is automatically changed with each command sent. For example, if an I/O is set to Digital Output-High and then the Digital Input Mode is selected, the I/O is first changed to Input Mode and then the high/low state is read and returned to the host.

Software

A test application program called IO20Demo is provided with the purchase of the DLP-IO20 that runs on Windows XP/Vista and can be used to interface with and control the DLP-IO20. (Note that the Visual C++ source is also available with the purchase of the DLP-IO20.) This application is designed to demonstrate all available features:

The version of the application provided for download with the DLP-IO20 targets Windows XP and Vista, but the Visual C++ 6.0 source code is available (upon purchase of the DLP-IO20) so that the application can be retargeted for different operating systems.

Of course, because the unit uses a simple serial, any software that can send data to a serial port can be used to control the IO20.

Downloads

User Manual >>

Test Application >>

USB Drivers >>