Home > Data Acquisition and Control > USB > USB Multifunction Data Acquisition
(Details shown apply to the default selection)
Analogue Inputs: 8Analogue Outputs: 2Digital Outputs: 4
1 in stock, immediate despatch
A-1010 is a RS485 and USB remote IO unit with 8 x analogue Inputs, 4 transistor digital outputs and 2 analogue outputs. The unit supports both Modbus RTU and Modbus ASCII protocols. The USB port can be used for configuration or can be used as the main communication interface, installing as a virtual serial port: no external power is required when connected to USB. Featuring a robust industrial construction with the use of optical isolators to prevent ground loop effects and limits damages from power surges.
The unit is configured using the free Utility Software. This can be used to set the units' IP address and to set the input ranges and monitor inputs.
DAQFactory is a low cost data acquisition and control software for SCADA, Factory Automation, HMI and Test and Measurement applications. DAQFactory provides all the tools needed to acquire data, log it, share it on a network, display it on the screen, graph it, analyse it, and automate your project. DAQFactory can communicate with just about any serial or Ethernet device using Modbus RTU, ASCII or Modbus/ TCP. It also supports a wide variety of DAQ devices including LabJack USB devices and many other DAQ cards.
More Information >>
User Manual >>
Quick Start Guide >>
Utility Software >>
USB Driver >>
DR-30-24 24Vdc 1.5A PSU DIN Rail Power Supply£39.00
REALVIEW - Data Logging, Chart recorder Software£49.00
PROFILAB-EXPERT - Graphical Data Acquisition Programming Package£99.00
DAQFACTORY-BASE - 64 Tag£459.00