Home Page Contact Us My Basket Checkout
USB-101I USB to RS232/422/485
Description
The USB-101I module is a cost-effective way to add an industrial RS232, RS422 or RS485 network using a USB connection. The USB-101 is a self-contained unit, obtaining it's power from the USB port. Industrial grade with 3kV opto-isolation and internal high-speed transient suppressors on each data line to protect from dangerous voltages levels or spikes. Supplied with virtual serial port software to mimic a traditional serial port for use with legacy software.
Product
USB-101I User Manual >> Driver Download >> Includes USB lead and DIN Rail clips	1 x RS232 via 9-way D-type 1 x RS422/485 via screw terminals RS-232 Signals : DCD , RX , TX , GND , RTS , CTS , DTR , DSR RS-422 Signals : RxD+ , RxD- , TxD+ , TxD- in Full-duplex (Surge Protection) RS-485 Signals : Data+ , Data- in Half-duplex (Surge Protection) Receive buffer : 576 Byte Transmit buffer : 640 Byte Baud Rate Speed : 300 bps to 230.4k bps Built-in RS-422/RS-485 Terminal Resister (Surge Protection) Minimum 3000 V DC isolation protection Auto-Detection of serial port type Built in Terminal 100 Ohm Terminal resistor SW selection ON/OFF 15KV ESD for all signal Operating system: Windows - 98E / 2000 / XP / Server 2003 /Vista , Mac osx / os9 , Linux 2.4 / 2.6 Operating Temperature: 0 to 70°C Storage Temperature : -20 to 85°C Humidity: 5-95% RH Dimensions : 88 * 91 * 27 mm ( W * D * H ) Panel, wall mounting tabs DIN Rail mounting clips supplied Supplied with USB cable WEIGHT : 94 gm
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757