Home Page Contact Us My Basket Checkout
TH2E - Ethernet Temp/Humidity Alarm
Description
The TH2E is an Ethernet based temperature and humidity alarm unit configured using a built-in web server. If the temperature or humidity exceed specified high/low thresholds, an e-mail alert is sent. A direct text output of the temperature and humidity values in ASCII also provided. Also supports TCP, UDP, HTTP (WEB), SMTP (e-mail), SOAP, Modbus TCP and SNMP protocols. The FREE Wix chart/data logging software is also available. Temperature Only - see TME >>
Features
TH2E User Manual >> Config software >>   TH2E-LOG -Version with Built-in Memory TH2E-LOG	Ethernet based Temperature/Humidity Alarm unit Measures relative humidity in range 0 % to 100 %. Measures temperature in range -40 to +123.8 °C Calculates dew point. TH2E-LOG - Saves data values to an internal memory with capacity of 10,000 records Data transfer via TCP/IP protocols (10/100 Ethernet) WEB based Configuration. 5V DC powered – wall-plug PSU included. Internal WEB page containing current temperature/humidity. Mobile WEB/WAP page for mobile viewing. Multiple TH2Es’ can be displayed on a single WEB page. Automatic e-mail alarms when pre-set thresholds are exceeded. SNMP and MODBUS TCP protocols - simple to integrate with management or SCADA software Automatic data sending via HTTP GET request. Automatic data sending via HTTP POST in XML format. Temperature/Humidity and all settings easily accessible in XML format. FREE Wix software for displaying values from TME (and other devices) PHP application containing graphs with temperature development in a set period. TME DLL library. (Including functionalsample and source code for C# .NET.) Free sample application for .NET, to be used to collect data from temperature sensors and presenting them as graphs, WEB service and RSS feed.
Web Browser
The TH2E is able to measure temperature, humidity and calculate dew point. Measured values can be viewed via WEB browser. Values can be logged in the internal memory with capacity for 10,000 records (TH2E-LOG Version). TH2E is capable to communicate via many standardized protocols, which makes it an ideal component for further integration to an existing system. Many of TCP/IP family protocols are supported. Available are for example: TCP data channel, SNMP and ModBus protocols, e-mail sending, HTTP GET and POST automatic sending to a remote server. Measured-out values and settings parameters are also available in XML format etc. All settings can be adjusted via WEB interface. Brief help pops up for all parameters.
WEB page It is possible to easy monitor the measured temperature, humidity and dew point and also to configure TH2E over the Intranet interface. The pages are secured by means of user name and password. It is possible to setup a separate password for the configuration and another one for the display of current values.   XML file It is also possible to import all the values from TH2E in the XML file format. This format is easy to process by the application or to read by the web service.   WAP page for PDA of mobile phone TH2E contains a simple WAP page with measured data. It is possible to open this page in a mobile phone, PDA or another mobile device. Thus the current status of the device can be viewed whenever needed. Inserting the current values into the WEB sites (HTTP GET) AD4ETH enables you to periodically call a script (for example PHP or ASP) on a selected WEB server and to hand the measured values and other parameters over to the server in the form of HTTP GET parameter. Thus you can easily include the currently measured values directly into your WEB site.     Current values handing-over to the WEB service (HTTP POST, SOAP) TH2E is also able to periodically send the measured data as HTTP POST in the format of XML SOAP (Simple Object Access Protocol). This way is ideal for further processing of the measured values by the WEB service waiting in a server on the Internet or Intranet. This data in the XML format can be easily processed, e.g. in the.NET or PHP environment – there is no need to program any communication protocol, etc. The only thing than needs to be done is to process the delivered XML file. SNMP protocol The SNMP protocol is used in large companies for the centralized administration and monitoring of all hardware and technologies. TH2E is able to communicate via this protocol and, according to the setup, It sends SNMP traps when the pre-set critical limits are exceeded. It is also able to periodically send traps with current values. E-mail TH2E is able to inform the user via email that the critical limits have been exceeded. (Thanks to services provided by operators it is possible to forward the e-mail easily to a mobile phone as an SMS message.) TCP or UDP protocol TH2E is also able to operate as the TCP client or TCP server or to communicate via UDP. An ASCII protocol is used by TH2E in these ways of communication. This way of communication is similar to the serial link communication. MODBUS TCP protocol TH2E is also able to communicate via the standard industry protocol of MODBUS TCP use by popular SCADA packages such as DAQFactory TH2E-LOG Logging in an internal memory TH2E-LOG saves measured-out values in an internal memory with capacity of 10,000 records. (1 record = one measured quantity). Each record contains it’s time marker. Power-up and power-down are stored in the memory as well. Three logging modes available: Time mode (periodically saves readings every X minutes), Differential (Saves measured value only if it changes more than X) and Logging limit values (saves the limit values only – regulation loops usage). When the memory is full, TH2E sends the data as an XML file to server or sends the data as a CSV file via e-mail.
Software
FREE - Wix Wix Download >>   FREE Powerful datalogging, charting and alarming sftware; Display of numeric values. Viewing the colour column (ie bar graph) with colour according to the current value. View the text of the current value. View the chart - add several charts, add channels to a single chart Datalogging - Save the history of measurement in a text file for further processing or evaluation. Wix can monitor inputs against pre-set alarm limits; Send alarm e-mail Switching on output (relay) to Quido Reset the counter (counter) input Quido Send alarm text message by SMS (requires GSM MODEM)   Optional - DAQFactory    DAQFAC-START Download Trial >>       DaqFactory-Starter is a new new cut-down version of the popular DAQFactory data acquisition and control package called DAQFactory Starter. DAQFactory Starter offers all the basic features of an HMI / SCADA software tool including data acquisition, data logging, three user definable screens with 44 screen components, powerful graphing and trending, plus Email and FTP out for a wide range of devices. Fully compatible with the DigiRail range. Ready-to Run MODBUS Scanning Tool Included with DAQFactory, the QuickMod Pro Modbus scanning tool allows you to quickly monitor and control a Modbus device connected over ModbusRTU on RS-232 / RS-422 / RS-485, ModbusRTU over Ethernet, or ModbusTCP. You can convert your data into engineering units, log it, and display a historical trend graph. Data acquisition (16 tags max) Data logging and charting 3 user definable screens 44 screen components Powerful graphing and trending Email out FTP uploading
ProfiLab-Expert - graphical programming software package for data acquisition and control applications Low cost graphical programming software package Optimised for data acquisition and control applications Wide range of control, display and maths function blocks. Programs are “written” by wiring function blocks together Create multi-page operator interfaces LED, numeric, meter, bar, chart , button, switches, panel controls Compile programs to executables without any run-time penalty Talk to the eDAM-9000 range via Modbus TCP More Information >>
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757