EDAM-8521 Addressable RS232 to RS-485/422 Converter

EDAM-8521 Addressable RS232 to RS-485/422 Converter
Our Price:  £79.00(£94.80 Inc. VAT)



2 in stock, immediate despatch

The EDAM-8510 can be used to add RS232 devices to an RS422 or RS485 network. The EDAM-8510 can read ASCII data from a "dumb" RS232 device, add an address and have the data available to read across a RS485/422 network in either ASCII or Modbus formats. The RS232 device baud rate and the RS422/485 baud rates can be the same or different.

Special Offer:  Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.

  • Add an RS232 device to a RS422 or RS485 Network
  • RS-232 And RS-485 Can Be Set To Different Baud Rates
  • RS-232 Support RTS, CTS Handshake Signal
  • Support Addressable Or Non-addressable Modes
  • Support ASCII Format And Modbus-RTU Protocol
  • Minimum 3000 VDC Isolation Protection
  • Transient Suppression On RS-485 Data Lines
  • Supported baud rates (bps): 1200, 2400, 4800, 9600, 19.2K, 38.4 K, 57.6 K, 115.2 K
  • Drive capability to 1200 m
  • Power And Data Flow LED Indicator For Troubleshooting
  • Power Requirement : +10 to +30 VDC, 0.7W
  • DIN rail or panel mount
  • Internal Watchdog Timer For Device Failure Protection

The EDAM-8521 is an intelligent RS-485/422 to RS-232 converter specifically designed to connect RS-232 devices to an RS-485 network with other RS-485 devices. RS-232 is the most common transmission standard. Although widely available on most computer systems, measurement equipment, PLCs, and industrial devices, its transmission speed, communication distance, and especially networking capability are limited. The EDAM-8521 addressable converter solves this problem and lets you easily build up an RS-485 network with your RS-232 devices by assigning each one an address.


User Manual >>

Utility >>