Home > RFID Readers & Controllers > Mifare 13.56MHz standard
Digital Inputs: 2Digital Outputs: 2RS485 Ports: 1
Special order, delayed despatch
The RFID-IND-M4 is an IP65 industrial 13.56MHz RFID controller equipped with an LCD display, Ethernet port supporting Modbus TCP, SNMP and web browser, RS485 port supporting MODBUS RTU protocol and a USB port used for configuration and testing of the module. It derives its power from a PoE 802.3af compliant Power Over Ethernet switch/hub. The device has two relay outputs and two inputs. Easy to configure using the free software.
The reader is equipped with RTC real time clock with SNTP synchronization and battery backup. Thanks to the built-in relays, the reader can perform, for example, the function of controlling and monitoring access to a specific place, warehouse and machine. Programming it via the embedded website, the user assigns a TAG (card, keyring) to a specific person, thus granting it access at the User or Master level. These data are then forwarded to the reader. Each use of the TAG is saved in the device’s memory. The user can download them at any time and check who, when and for how long used the assigned access.The reader can handle 1000 users (in the available option 4000) and register 30,000 events.
The outputs can be run in bistable, astable or temporary modes. Working time can be precisely defined up to 0.1 seconds.
The operating mode of the LEDs and the buzzer can also be individually programmed.
User Manual >>
Configuration Software >>
Ethernet Discover Software >>