IND-M1 - RFID Reader Relay Controller 13.56MHz - RS485 and USB

IND-M1 - RFID  Reader Relay Controller 13.56MHz - RS485 and USB
  Zoom
Our Price:  £139.00(£166.80 Inc. VAT)
+

Digital Inputs:  2
Digital Outputs:  2
RS485 Ports:  1

Availability:  

  

Special order, delayed despatch

The RFID-IND-M1 is an IP65 industrial 13.56MHz RFID controller equipped with an RS485 port supporting MODBUS RTU protocol and a USB port used for configuration and testing of the module. The device has two relay outputs and two inputs. Easy to configure using the free software.


Special Offer:  Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.

  • 13.56MHz Mifare compatible
  • 2 x Relay Outputs: 30VDC 1A, 125VAC 0.5A
  • 2 x Digital Inputs
  • 1 x RS485 supporting Modbus RTU Protocol
  • 1 x USB Port
  • Reading range: ≤ 10cm
  • Dimensions:  100mm x 100mm x 56mm
  • Operating temperature range: -10 to +40°С
  • Power Supply: 10-24VDC, 15 mA
  • IP65 Rated

IND M1 has been equipped with an RS485 port, a USB port (for configuration), two relay outputs and two inputs. The programming of the reader functions takes place in a readable application.

The outputs can be run in bistable, astable or temporary modes. Working time can be precisely defined up to 0.1 seconds.

The operating mode of the LEDs and the buzzer can also be individually programmed.

Regardless of the configuration program settings, signaling control can be carried out via the Modbus RTU protocol.


Downloads

User Manual >>

Configuration Software >>