Home Page Contact Us My Basket Checkout
RedLab-310X USB Analogue Output Unit
Description
The RedLab-310X range are USB analogue output units. The RedLab-3104 provides provides eight channels of voltage or current output whilst the Redlab-3106 provied sixteen channels of voltage or current output. Both models also offer eight digital I/O connections, and one 32-bit event counter. Supplied with free function generator software, and drivers for most DAQ packages and programming languages.
Product
RedLab-3104 8-Ch RedLab-3106 16-Ch	Depending on model 8 or 16 analogue outputs. Resolution 16 bit. Output ranges ±10V, 0-10V or 0-20 mA. Additional 8 discrete CMOS digital I/O channels. 32 bit event counter. Reliable screw terminals. Plug'n'Play USB 2.0 (full-speed, USB cable included). Power supply via USB. High drive models: Power supply included. Supported programming environments: C/C++, Delphi, Visual Studio, Visual Studio .NET, LabVIEW. Measurement Computing USB-310X compatible   RedLab-3104 Manual >> RedLab-3106 Manual >>
Input Sampling
The RedLab 310X is a USB 2.0 full-speed device that is supported under popular Microsoft Windows operating systems. The RedLab 3106 is fully compatible with both USB 1.1 and USB 2.0 ports. The RedLab 310X provides 8 or 16 channels of analogue voltage output, 8 or 16 channels of analogue current output, eight digital I/O connections, and one 32-bit event counter. The RedLab 310X has two or four quad (4-channel) 16-bit digital-to-analogue converters (DAC). Each D/A converter output controls a voltage and current channel pair simultaneously. You set the voltage output range of each DAC channel independently with software for either bipolar, unipolar or current. The bipolar range is ±10 V, the unipolar range is 0 to 10 V, and the analogue current range is 0 to 20 mA. Each voltage/current channel pair can be updated individually or simultaneously. A bidirectional synchronization connection allows you to simultaneously update the DAC outputs on multiple devices. The RedLab 310X features eight bidirectional digital I/O connections. You can configure the DIO lines as input or output in one 8-bit port. All digital pins are floating by default. A screw terminal connection is provided for pull-up (+5 V) or pull-down (0 volts) configuration. The 32-bit counter can count TTL pulses. The RedLab 310X is powered by the +5 volt USB supply from your computer. No external power is required. All I/O connections are made to the screw terminals located along each side of the RedLab 310X
Included Software
Universal Library (programming language support for Windows, Vista). InstaCAL utility (for easy installation, calibration and test). TracerDAQ application - Single-channel Function Generator application generates waveforms for analogue outputs at the maximum rate of the Measurement Computing device. The function generator displays the sample waveform, samples per cycle, internal scan rate, and base frequency of the selected analog channel output signal. Driver for LabVIEW.
Optional Software
DAQFactory - Flexible Data acquisition and control Flexible Data Acquisition, read different inputs at different intervals Continuous or conditional data logging. Log to binary or ASCII files. Automation. Create batches or add software process control to run your overall system. Two user definable screens you can create on the fly using any combination of 10 different screen components. No wiring! Powerful data visualization. Create publish quality graphs. This and more in one easy to use, flexible package. More Information >>
ProfiLab-Expert - graphical programming software package f data acquisition and control applications Low cost graphical programming software package Optimised for data acquisition and control applications Wide range of control, display and maths function blocks. Programs are “written” by wiring function blocks together Create multi-page operator interfaces LED, numeric, meter, bar, chart , button, switches, panel controls Compile programs to executables without any run-time penalty supports a wide range of Audon USB DAQ modules More Information >>
Accessories
USB Active Extender USB-EXT	A USB cable cannot be used reliably used where the distance is greater than 5m. For distances greater than this, an active USB repeater is required Connect up to 4 repeaters in series No external power required USB 1.1 and 2.0 each repeater is 5m long
USB Active Extender CAT5 USB-CAT5	Overcome USB's 5m transmission limitation by using this extender along with standard network cable. Can extend USB by up to 45m. Use standard CAT 5/5e/6 RJ45 cable to interconnect works up to 45m Master - RJ45 female, USB A male via lead Remote - RJ45 female, USB A socket No external power required USB 1.1 only NOTE - not supplied with RJ45 cable - just Master and Remote units
USB Active Extender with 4-port HUB USB-EXTHUB	Extend any USB peripheral up to 45m Use standard CAT 5/5E/6 network cable (not supplied) to interconnect units 4-port Hub on one of the units (5V power supply if devices are high current) Plug and play Supports Win 98/98SE/2000/XP and Mac OS 8.6 or higher Dimensions (HxWxD): 23x100x70mm
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757