Home Page Contact Us My Basket Checkout
MSO7102 Combo DSO & Logic Analyser
Description
The MSO7102 is a new, low-cost, full-featured 100MHz two-channel benchtop mixed-signal oscilloscope with 8-bit resolution sampling at 500MSPS, combined with a 16-channel logic analyzer - perfect for any engineer’s or student’s desk. USB connection makes printing stored results easy too. With a large 7.8” 640 x 480 colour LCD, MSO5022 is small enough and light enough to carry anywhere you need. See MSO5022 for 100MSPS Version >>
Product
MSO7102 User Manual >>   Support both DSO and LA 100MHz Bandwidth, 500MS/s real time sample rate 16 optional logic input channels Max 6000 points record length for each channel Dual channels + External trigger + Logic Analyzer Display 8 inch coloured LCD, 256 colors, STN/TFT screen, 640 x 480 pixels Support USB data transmission, display by real-time Advanced trigger functions: EDGE trigger, Bus trigger, Pattern trigger, Sequential queue trigger, Distributed queue trigger and Data width trigger. Supplied complete with carry case, scope leads, logic leads, CD and manual Dimension 370mm x 180mm x 120mm Weight 2.1KG     Digital Storage Ocilloscope   Bandwidth 100MHz Sample Rate(Real time) 500MS/s Channel Dual channels + external trigger + Logic Analyzer Horizontal scale (s/div) 5ns/div-5s/div(step by 1-2.5-5) Vertical Sensitivity 5mV/div~5V/div (at input) Vertical resolution (A/D) 8bits resolution (2CH simultaneously) Max. Input Voltage 300V(DC+ AC Peak) (1M? input impedance, ProbeAttenuation rate 10: 1) Input coupling DC, AC DC, AC, GND Trigger Mode EDGE\Video\Alternate\Mains supply Sampling Mode Normal, Peak detection, Average Record length Max. 6000 points on each channel Waveform storage 4 waveforms Automatic Measurement PK-PK, Average, RMS, Frequency, Cycle   Logic Analyser   16 input channels Sample rate (real time) 20S/s-500MS/s Bandwidth 33MHz-166MHz Record length 4M/channel Trigger mode EDGE trigger, Bus trigger, State trigger, Dataalignment trigger, Data width trigger Trigger position setting Pre-trigger, mid-trigger, Post-trigger Threshold Voltage 0~4V(4 settings) Input Signal Range 0~5V Data search Support Data System Binary system, Decimal system, Hex Digital filter 0, 1, 2 optional Setting storage Support 10 settings   The MSO7102T mixed-signal oscilloscope is a 2-channel colour unit that provides a combination of comprehensive features, speed of use and extensive analysis capabilities, functioning as a 2-channel oscilloscope or as a logic analyser. With its 100MHz bandwidth this instrument is perfect for design, testing and maintenance in the laboratory or workshop. Features a large 8in, colour STN display that makes analysis of waveforms easy and accurate. Additionally, features such as dual channel storage facilities and USB connectivity further enhance their useability. Contents of the kit include 1x pair of 1:1 (10:1) passive probe, USB cable, power cable, instruction manual, driver CD, adjustment probe compensation pen. Optional Rechargable Battery Pack - lasts 4-6 hours
Description
DSO Normal - operates like a normal DSO with simple manual control of timebase, triggering etc XY Mode - With the XY mode selected, CH1 is displayed on the horizontal axis and CH2 is on the vertical axis; when the oscilloscope is under the sampling mode in which no trigger is found, the data appears as light spots. Auto-set - The Auto-Set feature lets the Oscilloscope display and measure unknown signals automatically. This function optimizes the position, range, timebase and triggering and assures a stable display of virtually any waveform. Average Display - the displayed waveform is an average of a preset number of waveform samples. This can eleiminate noise which can otherwise obscure readings Automatic Measurements - The oscilloscope can perform 5 types automatic measurements such as frequency, cycle, average value, peak-to-peak value and root mean square value. And gives two kinds of measurement results simultaneously on the screen. MATHS functions - shows the result of adding, subtracting, multiplying or dividing calculation on CH1 and CH2 channel waveforms
Triggering There are two triggering modes including Edge triggering and Video triggering. Edge triggering: The Edge triggering is a mode by which trigger occurs at the triggering threshold value of the input signal edge. With the Edge triggering selected, the trigger happens on the rise or fall edge of the input signal Video triggering: With Video triggering selected, the oscilloscope performs the NTSC, PAL or SECAM standard video signals field or line trigger
Other Features Waveform Storage - up to 4 waveforms can be saved in the MSO7102s internal memory for comparison display or upload to a PC Data Upload to a PC - Stored Data can be uploaded to a PC via Rs232 or USB in bitmap or ASCII format.
Logic Analyser Data can be recorderd as per the following trigger modes; Edge trigger - make a channel as trigger source and set rising edge, falling edge or either edge as trigger condition to generate trigger Bus trigger - set BUS as trigger source and make data on BUS as the trigger condition to make trigger Pattern trigger - Set channel as signal source and make high/low voltage for channel as trigger condition combination to get trigger Sequential queue trigger - make BUS as trigger source and continuous setting data in BUS as trigger condition to enerate trigger and also can set 8 data at the same time Distributed queue trigger - make BUS as trigger source and dis-continuous setting data in BUS as trigger condition to generate trigger and also can set 8 data at the same time Data width queue trigger - Make BUS as trigger source and continuous duration in BUS as trigger condition to generate trigger
binary system, decimal system, hex are all available cursor analysis with zoom function Waveform playback, real-time display and printing functions are available Data cab be stored to USB memory stick
Specifications
DSO Bandwidth 100 MHz Real-time sample rate 500 MS/s Rising time <14ns Channels Dual Independently floating isolated inputs Yes (for multimeter and between oscilloscope and multimeter) Time base range 5 ns/div - 5 s/div Vertical sensitivity 5 mV/div - 5 V/div Trigger modes Edge (Normal, Single shot, Auto), Video Scope measurements 2 Cursor + 5 Automatic Record length 6K points per channel Memory for screen and set up 4 Screens, 4 set up Best Accuracy VDC &plusmn;(1% + 1; VAC &plusmn; ( 1% + 3) Logic Analyser Max sampling rate 500MHz Input Channel 16 channels Max Storage 4M /Channel Measurement bandwidth 33MHz Input impedance 1M ±2% Input Signal Range 0~5V Display Size 8 inch STN LCD Resolution 640 x 480 Mechanical specifications Size 370mm x 180mm x 120mm Weight 2.1K g Warranty Unit 3 years
Phone +44(0)1765 677425 | Fax +44(0)1765 676650