Home Page Contact Us My Basket Checkout
MSO5022 Combo DSO & Logic Analyser
Description
The MSO5022 is a new, low-cost, full-featured 25MHz two-channel benchtop mixed-signal oscilloscope with 8-bit resolution, combined with a 16-channel logic analyzer - perfect for any engineer’s or student’s desk. USB connection makes printing stored results easy too. With a large 7.8” 640 x 480 colour LCD, MSO5022 is small enough and light enough to carry anywhere you need.
Product
User Manual >>   Low-cost 2-Channel Digital Storage Oscillscope and 16-channel Logic Analyser Large 7.8" 640 x 480 pixel colour LCD display RS-232, USB port for programming & data transferring A profession ideal tool for design, maintenance and examination Supplied complete with carry case, scope leads, logic leads, CD and manual   Digital Storage Ocilloscope Sample rate up to 100MSPS, 25MHz bandwidth 5k/channel memory depth Manual cursor measurement Edge triggering, video triggering, 5 automatic measurement Independently floating isolated scope channels for safety Logic Analyser 16 input channels 100MHz/S max sampling rates for each channel 4M max Storage for each channel Many trigger Modes Convenient data measurement & data search Freely setting of all kinds of threshold level
Description
DSO Normal - operates like a normal DSO with simple manual control of timebase, triggering etc XY Mode - With the XY mode selected, CH1 is displayed on the horizontal axis and CH2 is on the vertical axis; when the oscilloscope is under the sampling mode in which no trigger is found, the data appears as light spots. Auto-set - The Auto-Set feature lets the Oscilloscope display and measure unknown signals automatically. This function optimizes the position, range, timebase and triggering and assures a stable display of virtually any waveform. Average Display - the displayed waveform is an average of a preset number of waveform samples. This can eleiminate noise which can otherwise obscure readings Automatic Measurements - The oscilloscope can perform 5 types automatic measurements such as frequency, cycle, average value, peak-to-peak value and root mean square value. And gives two kinds of measurement results simultaneously on the screen. MATHS functions - shows the result of adding, subtracting, multiplying or dividing calculation on CH1 and CH2 channel waveforms
Triggering There are two triggering modes including Edge triggering and Video triggering. Edge triggering: The Edge triggering is a mode by which trigger occurs at the triggering threshold value of the input signal edge. With the Edge triggering selected, the trigger happens on the rise or fall edge of the input signal Video triggering: With Video triggering selected, the oscilloscope performs the NTSC, PAL or SECAM standard video signals field or line trigger
Other Features Waveform Storage - up to 4 waveforms can be saved in the HDS1022M's internal memory for comparison display or upload to a PC Data Upload to a PC - Stored Data can be uploaded to a PC via Rs232 or USB in bitmap or ASCII format.
Logic Analyser Data can be recorderd as per the following trigger modes; Edge trigger - make a channel as trigger source and set rising edge, falling edge or either edge as trigger condition to generate trigger Bus trigger - set BUS as trigger source and make data on BUS as the trigger condition to make trigger Pattern trigger - Set channel as signal source and make high/low voltage for channel as trigger condition combination to get trigger Sequential queue trigger - make BUS as trigger source and continuous setting data in BUS as trigger condition to enerate trigger and also can set 8 data at the same time Distributed queue trigger - make BUS as trigger source and dis-continuous setting data in BUS as trigger condition to generate trigger and also can set 8 data at the same time Data width queue trigger - Make BUS as trigger source and continuous duration in BUS as trigger condition to generate trigger
binary system, decimal system, hex are all available cursor analysis with zoom function Waveform playback, real-time display and printing functions are available Data cab be stored to USB memory stick
Specifications
DSO Bandwidth 25 MHz Real-time sample rate 100 MS/s Rising time 17.5 ns Channels Dual Independently floating isolated inputs Yes (for multimeter and between oscilloscope and multimeter) Time base range 5 ns/div - 5 s/div Vertical sensitivity 5 mV/div - 5 V/div Trigger modes Edge (Normal, Single shot, Auto), Video Scope measurements 2 Cursor + 5 Automatic Record length 6K points per channel Memory for screen and set up 4 Screens, 4 set up Best Accuracy VDC ±(1% + 1; VAC ± ( 1% + 3) Logic Analyser Max sampling rate 100MHz Input Channel 16 channels Max Storage 4M /Channel Measurement bandwidth 33MHz Input impedance 1M ±2% Input Signal Range 0~5V Display Size 7.8 inch STN LCD Resolution 640 x 480 Mechanical specifications Size 370mm × 175mm × 135mm Weight 1000 g Warranty Unit 3 years
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757