Home > Data Acquisition and Control > Serial > RS485 Modbus > MODBUS-IO
Analogue Outputs: 8
No stock, discontinued
Low-cost Modbus RS485 based remote IO units, which provide a simple way for integrating analogue or digital signals to supervisory SCADA systems. The MBIO-8AOI has 8 isolated 0-20mA current outputs.
The module may be used as either a slave or master on the Modbus network. When used with a PC or PLC the module will be configured as a slave. When used with a MBIO-8AIIS module in a point-to-point configuration, the DIP switch 9 must be turned on to set the module up as a master. In this mode the PM8AO module will automatically read the information from the MBIO-8AOI module and write the input status to the outputs.
IOStudio is a free software package used to configure the communication settings for IO modules on the Modbus network. Once a module is detected, it is possible to view real-time data of the module directly on the PC and it can be used for diagnostic purposes as well.
User Manual >>
IOStudio Config Software >>
Customers who bought this item also bought:
DR-30-24 24Vdc 1.5A PSU DIN Rail Power Supply£39.00
DAQFACTORY-BASE - 64 Tag£429.00