MBIO-8AIIS - 8 Channel Isolated 4-20mA Input

MBIO-8AIIS - 8 Channel Isolated 4-20mA Input
Zoom  Zoom
Our Price:  £189.00(£226.80 Inc. VAT)

Analogue Inputs:  8


2 in stock, immediate despatch  

2 in stock, immediate despatch

Low-cost Modbus RS485 based remote IO units, which provide a simple way for integrating analogue or digital signals to supervisory SCADA systems. The MBIO-8AIIS has 8 isolated 4-20mA current loop inputs.

Special Offer:  Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.

  • 8 Differential Analogue Inputs
  • 0-20mAdc or 4-20mA input range
  • Resolution - 12 bit (0-4095)
  • Sample rate - 0.71 samples/sec
  • Input Impedance - 250 Ohms
  • Isolation (Inter Channel) - 350VAC (Pk-Pk)
  • Isolation (Field & Logic) - 1000VAC RMS
  • Operating Temperature. -10°C to + 50°C
  • Power Supply - 12-24V DC (30mA @12V, 17mA @24V)
  • Dimensions - 100mm x 90mm x 25mm (excluding screw terminals)
The MBIO-8AIIS is a 8 channel current input module. The inputs are fully isolated from input to logic and between inputs. This module is ideal for monitoring existing 4-20mA current loops which are isolated from each other and cannot be connected to a common point of reference.

The standard setting for the MBIO-8AIIS module is 0 - 20mA input current which represents an output value of 0 - 4095 (12 bits) in the corresponding Modbus register. To obtain an output value of 0 to 4095 for an input signal of 4 to 20mA the offset switch is switched on. This module can also be configured for a 0 – 20.000mA input range or +/- 20.000mA input.

Configuration Software

IOStudio is a free software package used to configure the communication settings for IO modules on the Modbus network. Once a module is detected, it is possible to view real-time data of the module directly on the PC and it can be used for diagnostic purposes as well.



User Manual >>

IOStudio Config Software >>  

Customers who bought this item also bought:

Continue ShoppingTell a Friend