Home > Data Acquisition and Control > Serial > RS485 Modbus Units > MODBUS-Standard
(Details shown apply to the default selection)
Digital Outputs: 2Temperature Inputs: 6
Special order, 3-5 days
The MODBUS-Standard range is a cost effective solution when a general purpose Modbus IO range is required. The SDM-6TE accepts most popular RTD sensor and most common thermocouple types. The units also has 2 transistor outputs that can be activated when analogue inputs exceed alarm thresholds. Can be configured for Modbus ASCII or RTU. Programmed via USB connection.
The SDM-6TE accepts most popular RTD sensor PT100, PT500, PT1000, Ni100, KTY81-110, NTC and most common thermocouple types. The units also has 2 transistor outputs that can be activated when analogue inputs exceed alarm thresholdsCommunication is via MODBUS RTU or MODBUS ASCII. The baud rate is configurable from 2400 to 115200.
The module is designed for mounting on a DIN rail in accordance with DIN EN 5002. The module is equipped with a set of LEDs used to indicate the status of inputs and outputs useful for diagnostic purposes and helping to find errors.
Module configuration is done via USB by using a dedicated free Modbus Configurator software. You can also change the parameters using the MODBUS protocol.
User Manual >>
Config Software >>
DR-15-24 24Vdc 0.63A PSU DIN Rail Power Supply£29.00
MOD-ETH Ethernet Modbus TCP to Modbus RTU, ASCII Gateway£139.00
EDAM-8530 Isolated USB to RS-232, RS-422, RS-485 Converter£39.00
WPC-132-DL RS485 Modbus Data Logger with Web Interface£149.00
DAQFACTORY-LITE - 32 Tag£229.00
DAQFACTORY-BASE - 64 Tag£459.00
DAQFACTORY-PRO - Unlimited£929.00