ENET-132W - Wireless LAN to RS232/485

ENET-132W - Wireless LAN to RS232/485
Zoom  Zoom
Our Price:  £129.00(£154.80 Inc. VAT)
Add UK 12V DC Mains PSU:  
Add EU 12V DC Mains PSU:  
Add DIN Rail Clip:  

RS232 Ports:  1
RS485 Ports:  1


No stock, discontinued  

No stock, discontinued

A Wireless version of the eNET range of Ethernet to Serial converters - a simple way of connecting any serial device, whether RS232 or RS485 to an Wireless Ethernet network. They feature a simple setup procedure, ease of operation and automatic network recovery. Supplied with Virtual Serial Port software to seamlessly add serial ports to your wireless Network. The eNET-132W has a single port which can be RS232/422/485 RS485.

  • Standard Compliance : IEEE 802.11 b / g
  • Spread Spectrum Technology: DSSS, OFDM
  • Tx Power 11b: Maximum 20 dBm
  • Tx Power 11g: Maximum 18 dBm
  • Rx Sensitivity: -70 dBm @ 54 Mbps, -85 dBm @ 11Mbps
  • Transmission Rate: 54 Mbps (max.) with auto fallback
  • Transmission distance: Up to 300 feet (@12 Mbps, in open areas)
  • Security: WEP 64-bit/128-bit data encryption, AES, WPA2
  • Antenna Connector: Reverse SMA
  • Network Mode: Infrastructure, Ad-Hoc
  • LAN for configuration / Ethernet hub
  • Ethernet: 10/100 Mbps, RJ45
  • Protection: Built-in 1.5 KV magnetic isolation
  • Serial Communication Parameters
    • No. of ports : 1 * RS-232/422/485 port, male DB9, S/W selectable
    • RS-232 Signals : TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
    • RS-422 Signal : Tx+ , Tx- , Rx+ , Rx –
    • RS-485 Signal : Data+ , Data-
    • Speed: 110 bps to 460.8+ Kbps
    • Serial Line Protection : 15 KV ESD for all signals
  • Power input 1: 12 VDC
  • Operating Temperature : -10 to 70°C (32 to 131°F), 5 to 95% RH
  • Dimensions: 120mm x 85mm x 35mm
Data Conversion between RS-232/422/485 and Wireless Lan

Convert serial device (RS-232, RS-422, RS-485) data/signal into the TCP/IP package data/signal and send them out with the Ethernet DataStream; or convert the TCP/IP package data/signal into serial device data/signal.

Wi-Fi Wireless Ethernet

It based on the latest industry standard Wi-Fi Certified IEEE 802.11b / g specification; it offers maximum channel speeds of up to 54 Mbps. The Wi-Fi function maintains interoperability within the 2.4 GHz frequency band, offering full compatibility with 802.11b / g networks. This integrated wireless solution of Serial to Wi-Fi Converter is widely deployed in business environments and is the standard for wireless access in public places. It also supports key security features like Wi-Fi Protected Access (WPA), WEP and 802.1x.

Dynamic IP Configuration

Supports DHCP client mode, simplifying network address

Server / Client Dual Modes

Series can be configured as network server or network client. In the client mode, it can be installed in network which is protected by NAT router or firewall, without the need of a real IP address.

Web-based Setup

Parameters setup is based on HTTPS protocol by using standard browsers (IE and Netscape). No special software would be required.

Built-in Security Control

Protected by both setup password and access password to prevent intruders.

Remote updated

Firmware can be reprogrammed directly via Ethernet network to keep up with latest network standards.

DS Tool Software Setup

On PC we provide a Device Management Utility named DS Tool which is an executable program in Windows 32 bit environments.  DS Tool Setup is used to detect and setup the installed converter.  It uses UDP broadcast packets to query and configure converters on the network.

Virtual COM Mode

“Service Mode” enables the serial port in Serial to Wi-Fi converter to act and be controlled as PC’s COM port for Windows. One PC can have as many as COM ports on the network without the limitation of PC’s physical slots. The Virtual COM ports on the network can also be shared by multiple hosts


Quick Start guide >>

User Manual >>

DS-TOOLS 32-bit >>

DS-TOOLS 64-bit >>


Continue ShoppingTell a Friend