|
The
IP9280 system consists of 2 basic parts, the main IP9280 control
unit and up to 8 PCI cards which are fited to spare PCI slots in the
target server/PC (just a bracket slot is required, not a PCI
connector). The PCI cards are then connected to the IP9280 control
unit via standard RJ45 cable. (This is NOT your LAN, but dedicated
cable that just connects the PCI card to the IP9280). The PCI card
has connections to the target Server/PC power supply, case and
motherboard RESET and POWER connectors. The PCI card works in
parallel with the case POWER and RESET buttons.
The
IP9280 control unit is connected to your LAN and the IPEdit utility
run to set up the unit's IP address. Thereafter, all configuration
settings are performed via the IP-9280's built-in webserver.
Manual
Control
The
Power settings in the Power Configuration section allows you to
Rename your devices, and allows you to manually Power on/off, or
Reset your target severs/PC's.
Power
Reboot by Ping
The
Automatic Ping Settings function in the Power Configuration section
allows you to keep your CPU’s / Server in a good state. With
this watchdog technology it allows you to automatically keep pinging
your Servers or PC's to make sure that there is no computer that has
hung or frozen.
Timer
Control
The
Power Schedule in the Power Configuration section allows you, the
user to select a certain time of the day, week, or month to turn off
/ on or reset the Cpu’s / Servers that are attached to the
device. This will keep your computers stable and clear used memory in
the long term. The power schedule settings is separated into two
separate schedules. Power schedule 1 is composed of Devices 1-4 and
Power schedule 2 is composed of Devices 5-8.
The
Frequency option can be set to Just Once, Every Day, Monday to
Friday only, or Weekend Only.
|