|
Initial
setup and IP address settings are initially performed through a
small utility program. Thereafter, all the functions of the IP-9258DS
are accessed through a web browser.
Manual
Switching on/off
The
user can manually switch the 8 power outputs on or off. In the Timer
section, a delay in seconds can also be entered before the on/off action.
Outlet
State Query
Clicking
on the “ Set Power” button on the left will show the
current on/off state of the 8 outputs.
Timer
Control
The
"Power Schedule" selection allows the power outputs to be
switch on or off at preset date/time intervals
Power
Reboot by Ping
The
IP WatchDog feature means that the device will restart (switch off
/on) powered port when some user defined IP address stop responding
to a ping (and ideally also HTTP port check ).
An
ideal example of how you could use this is that if your broadband
router was going offline and stopping you contacting the 9258DS, you
could get the 9258DS to reboot the router if the 9258DS stops getting
a ping reply from an external internet address (i.e. if your internet
connection is down).In short, it would reboot your broadband router
if the connection goes down!
 |