Home Page Contact Us My Basket Checkout
DLP-IO8 USB Analogue, Digital DAQ
Description
The DLP-IO8 Data Acquisition Module is a low-cost, easy-to-use data acquisition system for measuring voltages, controlling and monitoring processes, and acquiring temperature data. Each of the 8 available channels can be configured for any of the digital, analogue, or temperature modes via single-byte commands. All operational power is taken from the host PC via the USB port. Compatible with Profilab DAQ Software.
Description
	8 Channels: Digital I/O, Analogue In, Temperature (requires DS18B20 sensor, purchased separately) 10-bit A/D: 0-5 volt range. Easy to use single byte commands USB 1.1, 2.0 Compatible Installs as a virtual Comm port Drivers available for Windows, MAC, Linux and Windows CE Compatible with the optional RealView Datalogging and chart recording software ProfiLab-Expert Software Driver Small Footprint - 102mm x 24mm x 12mm Easy to Use with Single-Byte Commands Can Utilize a Simple Terminal Emulator to Control All Functions User Manual >>
Using The DLP-IO8
The DLP-IO8 Data Acquisition Module is a low-cost, easy-to-use data acquisition system for measuring voltages, controlling and monitoring processes, and acquiring temperature data. Each of the 8 available channels can be configured for any of the digital, analog, or temperature modes via single-byte commands. All operational power is taken from the host PC via the USB port. Each of the 8 inputs can be set to analogue voltage in (10-bit 0-5V range), digital in (logic 0 or 1, 5V) digital out (0 or 5V 25mA source/sink max) or temperature in (using a DS1820 1-wire temperature sensor IC, -55 to 125°C range) The mode of each I/O is automatically changed with each command sent. For example, if an I/O is set to Digital Output – High and then the Digital Input Mode is selected, the I/O is first changed to Input Mode and then the high/low state is read and returned to the host.
Accessories
USB Active Extender USB-EXT	A USB cable cannot be used reliably used where the distance is greater than 5m. For distances greater than this, an active USB repeater is required Connect up to 4 repeaters in series No external power required USB 1.1 and 2.0 each repeater is 5m long
USB Active Extender CAT5 USB-CAT5	Overcome USB's 5m transmission limitation by using this extender along with standard network cable. Can extend USB by up to 45m. Use standard CAT 5/5e/6 RJ45 cable to interconnect works up to 45m Master - RJ45 female, USB A male via lead Remote - RJ45 female, USB A socket No external power required USB 1.1 only NOTE - not supplied with RJ45 cable - just Master and Remote units.
USB Active Extender with 4-port HUB USB-EXTHUB	Extend any USB peripheral up to 45m Use standard CAT 5/5E/6 network cable (not supplied) to interconnect units 4-port Hub on one of the units (5V power supply if devices are high current) Plug and play Supports Win 98/98SE/2000/XP and Mac OS 8.6 or higher Dimensions (HxWxD): 23x100x70mm
RealView Chart Recorder software
	logs your data to an ASCII Excel compatible datafile multiple plots per charts, multiple chart pages plot zoom functions copy chart display as an image file print out chart display with annotations More Information >>   1 x DLP-IO8G and 1 x Copy of RealView
Write your own Program without any Programming Knowledge!
ProfiLab - a low cost graphical programming package designed for data acquisition and control applications. No programing experience is needed, programs are written by connecting function blocks together with wires. Professional user panels can be designed with custom controls, and the whole program can be compiled into a stand-alone executable file, with no run-time penalties. So, you can modify or create your own program with ProfiLab for use with the IOR4 and many other I/O hardware. Click here for more information >>
Phone +44(0)1765 677425 | Fax +44(0)1765 676650