Home Page Contact Us My Basket Checkout
HandyScope 4 USB 4 Ch Instrument
Description
The Handyscope HS4 is a powerful 4-channel computer controlled measuring instrument that consists of four measuring instruments: a Multimeter, an Oscilloscope, a Spectrum analyzer and a Transient recorder. This new powerful and compact measuring instrument can solve almost every measurement problem. Ideal for high channel count, high speed data acquisistion tasks.
Product
FREE Supplied Software Oscilloscope Multimeter Spectrum Analyser   Transient Recorder   Multi-instruments	Analogue inputs: 4 channels Resolution: 12-bit @ 50MS/s 14-bit @ 3.125MS/s 16-bit @ 195kS/s Measurement ranges: 200mV to 80V full scale Input coupling: AC/ DC Accuracy: 0.2% ±1 LSB Triggers: Analogue (CH1 and/or CH2) or digital Trigger modes: rising/ falling slope, inside/ outside window Pre/ post trigger: 0 to 131,060 samples Connectors: BNC on front DB25 on rear for digital triggers FREE Ocilloscope, Multimeter, Spectrum Analyser, Transient Recorder and Arbitrary Waveform Generator software Supplied with VB, C++, Delphi MatLab, LabVIEW drivers and examples User Manual >> Software Manual >>
HS4
The Handyscope HS4 is a powerful 4-channel computer controlled measuring instrument that consists of four measuring instruments: a Multimeter, an Oscilloscope, a Spectrum analyzer and a Transient recorder. This new powerful and compact measuring instrument can solve almost every measurement problem. Ideal for high channel count, high speed data acquisistion tasks. The Handyscope HS4 features a user selectable 12 bit, 14 bit or 16 bit resolution (14 bit effective, SNR 95 dB), 200 mV - 80 V full scale input range, 128 Ksamples record length per channel and a sampling frequency up to 50 MHz on all four channels. Connected to the fast USB 2.0 interface, the Handyscope HS4 doesn't require an external power supply, fully supporting the "Plug in and measure" ideal. The universal software that is delivered with the Handyscope HS4 turns your PC into a storage oscilloscope, a spectrum analyzer, a voltmeter and a transient recorder. An intelligent auto setup allows the inexperienced user to perform measurements immediately. The software allows you to save instrument settings on disk. Later these setting files can be recalled, reducing the setup time of your instrument to an absolute minimum
Models
Model Max Sampling Speed Price Add to Basket HS4-5 5MHz HS4-10 10MHz HS4-25 25MHz HS4-50 50MHz All models supplied with four 1:1 - 1:10 switchable oscilloscope probes, Windows software and User manuals
Specifications
Acquisition System Number of input channels 4 analogue, BNC Resolution 12 bit @ 50 MS/s 14 bit @ 3.125 MS/s 16 bit @ 195.3125 kS/s Accuracy 0.2% ± 1 LSB Sensitivity 200 mVolt .. 80 Volt full scale Coupling AC/DC Impedance 1 MOhm / 30 pF Protection ±200 Volt (DC + AC peak < 10 kHz) Bandwidth (-3dB) DC to 50 MHz maximum AC coupling cut off frequency (-3dB) 1 Hz with 1x probe Maximum sampling rate 50 MHz, 20 nsec (model HS4-50) 25 MHz, 40 nsec (model HS4-25) 10 MHz, 100 nsec (model HS4-10) 5 MHz, 200 nsec (model HS4-5 ) Sampling source internal ±0.01%, external Memory 0 - 131060 samples each channel Trigger system System digital, 2 levels Source CH1, CH2, CH3, CH4, AND, OR, digital external Trigger modes rising slope, falling slope, inside window, outside window, peak Level adjustment 0 - 100% of full scale Hysteresis adjustment 0 - 100% of full scale Resolution 0.025% (12 bits) Digital trigger input level 0 - 3.3 volt (5 volt max) Pre trigger 0 - 131060 samples (0 - 100%, one sample resolution) Post trigger 0 - 131060 samples (0 - 100%, one sample resolution	Interface Interface USB 2.0 (USB 1 also supported) Power Requirements Power from USB port 500 mA max (2.5 Watt max) Power via extension connector 1500 mA max (7.5 Watt max) Physical Instrument height 25 mm (1 inch) Instrument length 170 mm (6.7 inch) Instrument width 140 mm (5.2 inch) Cord length 1.8 meter (70 inch) Weight 480 gram (17 ounce) Accessories 2 oscilloscope probes 1:1 - 1:10 switchable external power cable for PS/2 mouse or keyboard connector
Third Party Software
A major advantage of the HandyScope measuring instruments is the ability to work with third party software tools. Instead of the normal software package delivered with the measuring equipment, you can now use your favourite measuring environment to acquire the data you want. This allows for a very flexible measuring setup, which is virtually unlimited in possibilities. Total integration can be achieved in, for example, Mathworks' Matlab and LabVIEW. Processing your measured data has never been easier! In addition, it's even possible to write your own software for the HandiScope equipment. Total control over your measurements is within reach! The third party support is made possible through the use of a Windows Dynamic Link Library (DLL) file. Whether you're using LabVIEW, Matlab or Visual Studio to develop your own measuring tools, the DLL that belongs to a specific measuring instrument is the interface between your application and the measuring instrument. Some of the third party tools are able to import functions from the DLL direct, like LabVIEW. However, most tools need a header file or an equivalent file to know which functions to import from the DLL. These files are all included with the DLL and can be found in the download section.	Software Download >>
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757