Home Page Contact Us My Basket Checkout
HandyProbe HP3 USB 800V Oscilloscope
Description
The Handyprobe HP3 is a portable USB oscilloscope with a full differential input that will allow you to measure voltages up to 800 V peak value with a maximum sampling rate of 100 MSamples/s into a memory of 1 MS/Sec. The Handyprobe HP3 comes with the versatile Multi Channel measurement software that allows to do measurements in a quick and convenient way. With the software, the Handyprobe HP3 can be operated as an oscilloscope, a multimeter, a spectrum analyzer and a Y-t recorder.
Product
HP3-5 5MHz HP3-20 20MHz HP3-50 50MHz User Manual >>   Oscilloscope Multimeter Spectrum Analyser   Transient Recorder   Multi-instruments Software Download >>	Single channel USB Scope Input via 4 mm banana jack sockets 10-bit resolution Sampling Rate: 100 MS/sec real time (model HP3-100) 20 MS/sec real time (model HP3-20) 5 MS/sec real time (model HP3-5 Maximum streaming rate 10 MS/sec (model HP3-100) 2 MS/sec (model HP3-20) 500 kS/sec (model HP3-5) Input range - 0.2 V .. 800 V full scale in a 2 - 4 - 8 sequence AC/ DC input coupling Maximum input voltage (in all ranges) - 600 VRMS CAT II Accuracy: 0.3% ±1 LSB Trigger modes: rising/ falling slope, inside/ outside window Pre/ post trigger: 0 to 1048576 samples Interface - USB 2.0 High Speed Power from USB port - 400 mA max Dimensions - 177mm x 68mm x 25mm Operating System - Windows 98/ME/2000/XP/Vista32/Win 7 FREE Ocilloscope, Multimeter, Spectrum Analyser, Transient Recorder Supplied with VB, C++, Delphi MatLab, LabVIEW drivers and examples Includes Hard carry case, Low noise, heat resistant differential test lead with 4 mm banana jacks and colored clips, 2 test probes with 4 mm banana socket, 2 crocodile clips with 4 mm banana socket, Wrist strap, Multi Channel software, User's manual
Features
The Handyprobe HP3 is a portable USB oscilloscope with a full differential input that will allow you to measure voltages up to 800 V peak value with a maximum sampling rate of 100 MSamples/s into a memory of 1 MS/Sec. The differential input with a high input range of 800 V full scale gives unequalled possibilities in measuring Connect the Handyprobe HP3 to any point in your circuit, without the need of additional attenuators. The differential input makes it impossible to create a short circuit to ground via the Handyprobe HP3. This means extra protection for the PC. The Handyprobe HP3 is designed to fit nicely in your hand. Its housing is fitted with soft rubber areas that ensure a good grip on it. A wrist strap can be attached, to carry the Handyprobe HP3 or to hang it near the test setup. The Handyprobe HP3 is USB powered, so no bulky external power adapter is required. Key specifications Fast and compact measuring instrument with a wide input range from 200 mV full scale to 800 V full scale without the need for additional probes or attenuators. High bandwidth of 50 MHz to be able to analyze fast signals accurately. No short circuit to ground possible, due to the differential input. This means extra protection for your PC. The two measuring points can be far apart, making it easy to measure in large installations. Fast streaming, up to 10 million samples per second continuously for fast and long measurements. Amplitude accuracy of 0.3% full scale. Most oscilloscopes have an accuracy of 2 - 3 %. No external power supply required. Power is gotten from a USB port. Very versatile Multi Channel software with an oscilloscope, spectrum analyzer, Y-t recorder and voltmeter with many signal analysis functions. Exporting of measured data to various common data formats, making it possible to create your own reports. The Handyprobe HP3 comes in a solid case, including test pins and crocodile clamps.
Low noise measuring lead A special low noise measuring lead is developed for the Handyprobe HP3. The input of the Handyprobe HP3 is differential, which means that both sides of the input have a high impedance. There is no connection to ground as in conventional oscilloscopes which are used with coax cables. The special cable that is developed for the Handyprobe HP3 is very insensitive for external interfering signals. The two ends can be placed two meters apart from each other, without picking up any interference. It is possible to connect the negative terminal of the input at one side of your test object and then connect the positive terminal at a different point, up to two meters away. With a conventional oscilloscope this is not possible. The maximum distance between the positive side and ground is then usually limited to approximately 20 cm. And this 20 cm is very susceptible to interference. The measuring lead has a heat resistant silicone isolation and shrouded banana plugs.
Software
The Handyprobe HP3 comes with the versatile Multi Channel measurement software that allows to do measurements in a quick and convenient way. With the software, the Handyprobe HP3 can be operated as an oscilloscope, a multimeter, a spectrum analyzer and a Y-t recorder. The captured data can be viewed in many different ways, in a single graph or in multiple views, each displaying a different property of the measured signal. Mathematical Operations Mathematical operations like e.g. adding, subtracting, multiplying, dividing, integrating, differentiating etc. are available in the form of processing blocks. Besides the mathematical operations, there are also several processing blocks to perform other operations on the data, like determining minimum or maximum values, limiting to specified range, averaging, filtering, applying gain and offset, etc. Combining these mathematical processing blocks gives unrivalled possibilities in constructing complex mathematical operations. The results of these operations can be displayed in one or more graphs, can be displayed in numeric displays and can be written to disk in various common formats. Spectrum Analyzer Use the spectrum analyzer to see the frequency spectrum of your signal next to the time domain signal. Various windowing functions display functions are available to meet your requirements.
Streaming Measurements When 1 MSamples record length is not enough, it is also possible to perform continuous, uninterrupted streaming measurements to measure as long as needed. Limited only by the available hard drive space, any long signal can be measured and stored for later analysis. Of course all mathematical operations are available in streaming mode as well. Applications The excellent hardware specifications and the versatile software make the Handyprobe HP3 an ideal instrument for measuring in e.g. mains power installations, switch mode power supplies, frequency converters, automotive applications, etc. The balanced differential input also makes it possible to measure directly on various communication buses with balanced signals, like e.g. CAN.
Included
	The Handyprobe HP3 comes with: Hard carry case Low noise, heat resistant differential test lead with 4 mm banana jacks and colored clips 2 test probes with 4 mm banana socket 2 crocodile clips with 4 mm banana socket Wrist strap Multi Channel software User's manual
Phone +44(0)1765 677425 | Fax +44(0)1765 676650