	Products
PC Data Acquisition and Control Dataloggers and Chart Recorders Oscilloscopes, Test and Measurement Weather Stations IT Network Systems - Monitoring and Alarm Home Automation and GSM Control • SMS Text Message Control • Internet Home Control • Accessories PLC's and Industrial Controllers Data Communications HMI, Panel PC's and LCD Products

	Main Menu
Home Contact Us Pay by Card Privacy Policy Terms and Conditions

EYE-02 - GSM Security Camera Alarm

Zoom

Our Price: £279.00(Exc. 20% VAT)

Availability:

4 in stock, immediate despatch

The EYE-02 is a stand-alone security camera designed for do-it-yourself easy installation and operation, which can record videos, and transfer individual video frames on demand via the GSM network and much more. MMS, SMS, and voice calls are supported together with the online transfer of individual video frames to your cell phone. A built-in infra-red motion sensor (PIR) is included, with in-picture motion detection, a glass-break detector, a built-in microphone for audio monitoring, and the ability of infra-red night viewing.

GSM camera alarm unit
Designed for do-it-yourself easy installation and operation
Can send text message or MMS image to your mobile phone on alarm
MMS, SMS, voice call supported - online broadcast to your mobile phone
Wide range of detectors built-in for alarm activation by movement, sound, external alert, etc.

Infrared motion sensor (PIR)
In-picture motion detection
Glass-break detector
Microphone for remote audio monitoring
Tamper - tilt and vibration

Infrared night view capable
For use with SIM cards from most mobile phone operators (including pay-as-you-go types)
Images and video stored on 1G micro-SD card (included)
Built-in wireless interface - compatible with a wide range of additional external wireless sensors and sirens to form a complete alarm system
USB connectivity - supplied with free configuration software
Mains powered with battery backup (operates for up to 24 hours on mains failure)
Keyfob remote control for arm/disarm

EYE-02 is a security and monitoring camera which communicates wirelessly via the GSM network. EYE-02 integrates the following built-in detectors that allows to detect an intruder:

PIR motion detector - Detects movement by sensitive detection of human body temperature.
Glass-break detector - Recognizes the specific sound of breaking window glass
Tilt and vibration detector - Recognizes any unwanted change in the camera‘s position and angle
Motion-in-Picture detector - Detects changes in a scene by taking snapshots regularly and comparing them

When triggered by an intruder, EYE-2 can;

Send an alarm record using MMS, SMS or voice call. Using MMS, the actual image can be viewed on your mobile phone
Copies of pictures and videos can be stored on the memory card or can be stored at a web server. Alarm Receiving Centers are also supported.

EYE-02 allows 24 hour monitoring via its night view mode and is compatible with a wide range of external wireless devices.

EYE-02 is simple to install and configure (suitable for DIY installations)

Operating Modes

The EYE-02 camera has three main working modes: SLEEP, WATCH and CONFIG

SLEEP mode is a stand-by mode of the camera. The camera doesn’t detect any movement in the targeted area and the major detectors are disabled. The only active detectors are those which protect camera itself against the unwanted manipulation by an intruder.
In WATCH mode camera guards fully the targeted area, all detectors are active.
CONFIG mode allows user to change camera settings and switch the camera to other special modes.

The EYE-02 is supplied with a wireless remote control which can be used to switch between camera modes.

Profiles

The EYE-02 camera allows fast and simple setting of all necessary detector parameters by selecting one of the pre-defined PROFILEs. These profiles are suitable for most camera applications. If necessary, the profile may be further adjusted by the user.

Home

HOME profile has been designed for camera installation inside a building (house, flat, office). During WATCH mode, there are no movements of people, no wind drafts, no significant temperature changes, or loud noises etc. expected.

Outdoor

OUTDOOR profile fits best camera installation outside your home. The camera significantly reduces its detectors’ sensitivity in OUTDOOR as there are many possible sources which could cause a false alarm triggering (sunshine, animals, street noise, wind, etc.).

NOTE - The EYE-02 enclosure is not waterproof, and would need to be fitted in a KAC-EYE Outdoor Enclosure >>

Garage

This profile is suitable for installation inside your garage. It is similar to the HOME profile. Additionally, the GARAGE profile provides a 30-second entrance delay. It allows you to open the garage or home entrance door first and switch the camera to SLEEP during this delay.

Care

Profile CARE has been especially designed for monitoring small children and elderly or disabled people. The camera used in CARE profile allows the user to leave their home, stay in a short distance away from the home and watch their sleeping baby or ill grandmother etc. at the same time.

The camera is activated by movement or by a PANIC alarm (triggered by a RC-87 personal wrist button)

Shop

The most powerful profile is SHOP. In this mode, all detectors are active, including the permanent process of “Motion in Picture” detection. This profile offers the highest quality of permanent monitoring; consequently it is the highest energy consumption profile. This profile perfectly fits places requiring the whole day monitoring and full protection during the night time, such as shops, office corridors and reception areas, etc.

Camera Configuration

The most convenient way to set-up the EYE-02 camera and configure its parameters is by using PC and the JabloTool software and the included USB lead. JabloTool DESKTOP is available as a software on installation CD included in the camera package.

The EYE-02 camera can set using the JabloTool software to report events to mobile phones (via voice call, text message, MMS) or to e-mail addresses. Up to 10 different phone numbers and 10 e-mail addresses can be saved to the camera list.

By the default settings camera sends an MMS and makes a call to all enrolled contacts in case of an alarm.Every event detected by the EYE-02 camera is recorded into the camera’s SD Card memory (1G card included). The event record consists of the date and time mark, detail description of the event including its source and a video record. Parameters such as record mode, record interval,image size and quality etc can be set. JabloTool software can also be use to review and play recorded video.

Downloads

User Guide >>

Quick Start Guide >>

Outdoor installation Application Note >>

JabTool Software >>