GD-02-DIN GSM Remote Control - Temperature Alarm, Thermostat and Pulse Counter

GD-02-DIN GSM Remote Control - Temperature Alarm, Thermostat and Pulse Counter
Zoom  Zoom
Our Price:  £139.00(£166.80 Inc. VAT)

Digital Inputs:  2
Digital Outputs:  2
Temperature Inputs:  1
Pulse Counter Inputs:  1


5 in stock, immediate despatch  

5 in stock, immediate despatch

GD-02T Temperaure Sensor for GD-02-DINGD-02T Temperaure Sensor for GD-02-DIN

The GD-02-DIN is a GSM multi-function control unit with 2 digital inputs with pulse counting on one input, 2 relay outputs and a temperature input. The GD-02-DIN can be configured using the GD-Link software to be a simple IO unit, a temperature alarm unit, a thermostat controlling its main output relay to a temperature setpoint or it can be used to count pulse from a utility meter. The GD-02-DIN can be monitored and controlled via SMS text messages and the unit can be set to send SMS text message status reports or utility meter consumption readings on alarm or on a regular timed basis.

Special Offer:  Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.

  • GSM/GPRS Control Unit using SMS text messaging
  • 1 x mains rated change-over relay rated 240VAC at 16A resistive, 8A inductive (REL1)
  • 1 x Digital Input - volt-free contact or 24V DC signal (IN1)
  • 1 x Optional temperate sensor input - measuring range -30°C to 125°C (TH+, TH-)
  • 1 x Multi-function Input - only one function support at a time (IN2/REL2)
    • digital input - volt-free contact or 24VDC (IN2)
    • open collector transistor output 24VDC @ 100mA (REL2)
    • pulse counter input - connect to electricity, gas, water utility meters
  • Operating Modes
    • Simple control unit - switch relays on/off via text message
    • Digital alarm unit - get contact input status report via text message
    • Temperature alarm unit - get text message alert when temperature falls outside high/low limits (requires optional sensor)
    • Thermostat - control the output relay REL1 to maintain a temperature setpoint. Adjust temperature setpoint via text message. (requires optional sensor)
    • Utility meter pulse counting - connect to electricity, gas or water meter - count consumption pulses and get regular readings by text message
  • Uses standard mobile phone SIM card, including pre-paid (not the 3 network)
  • Easy to use and configure via PC with USB connection and GDLink software
  • Up to 10 authorized numbers can be set for control and reporting.
  • Automatic scheduled status report text message
  • 240VAC Mains supply
  • Supplied with USB programming lead
  • Battery back-up for operation even during mains power failure (approx 3 hour backup time)
  • Quad band so will work anywhere in the world
  • GSM antenna included, connected to SMA connector
  • DIN Rail or panel mount
  • Dimensions 190 x 36 x 58 mm
  • Operational temperature range -20 °C to +50 °C


User Manual >>

Programming Software >>

Continue ShoppingTell a Friend