Home Page Contact Us My Basket Checkout
GSM-8000 Mobile Phone Alarm & Control
Description
The GSM-8000 is a low cost solution to Remote Control and Monitoring via your mobile phone. The GSM-8000 can monitor 8 analogue and 8 digital switch inputs. A SMS alarm message can be sent when inputs exceed preset limits. The user can also interrigate the inputs through SMS messaging. The GSM-8000 also has 8 relay outputs which can be activated via SMS and used to switch lamps, pumps, heaters etc. The GSM-8000 is complete with an LCD display, keypad and built-in Dual Band Modem.
Product
GSM-8000 User Manual >>	Control/Monitor via GSM mobile telephone, with no distance limitation, the user can control/monitor/alarm their installation from over the world via their mobile telephone. 8 x 12-bit 4-20mA analogue inputs 8 x mains rated relay outputs. 8 x digital/switch inputs Analogue inputs can be scaled to meaningful engineering units (°C, Analogue inputs have both high and low alarm setpoints. Alarm activation notification sent via SMS Digital/Switch inputs can generate SMS message on contact closure Relay outputs controlled via SMS. Dot matrix LCD display, shows all channel values, input and output status. Mobile phone can read analogue inputs and digital input status Up to 2 seperate mobile phone numbers can be dialled Build-in GSM mobile telephone modem ( dual band 900/1800 MHz) SIM card is NOT included
SMS Commands to GSM-8000
SET-DOP xxxxxxxx - set the digital output status, where x = 1 for relay on and x = 0 for relay off SET-DIP-ALARM xxxxxxxx - set the digital input alarm enable or disable where 1 = enable alarm and 0 = disable alarm SET-CH-ALARM xxxxxxxx - set the analogue input alarm enable or disable where 1 = enable alarm and 0 = disable alarm GET-CH - Get analogue input readings. GSM-8000 sends a return SMS message with analogue input readings and alarm status GET-STATE - Get current I/O status. GSM-8000 sends a return SMS message with all alarm status RESET - perform system reset
Accessories
PowerEgg - Mains Switch/Monitor	Switches mains power via GSM-8000 relay output Returns main on/off status via GSM-8000 digital input IEC input/output connectors Controls fully isolated from mains 110 to 230VAC, switches up to 8A User Manual >>
Specifications
Display - Dot-matrix LCD with back light,16 characters x 2 line. GSM Modem900/1800 MHz, dual band. Switch inputs - 8 inputs Reaction time 200 mS, min. Status - Default open, Close will alarm Analog input - 8 channels 4 to 20 mA Input impedance 125 ohm Resolution12 bits A/D converter Relay outputs 8 relays Function Relay 1 to Relay 7 can be control by mobile via SMS. Relay 8 is the alarm relay used to connect to field alarm system Max load 1A 250ACV, 1A/24 DCV CE conformity Operating Temperature - 0 to 50°C Humidity Less than 80% RH. Power supply DC 9V, less than 400 mA DC. Size193 x 149 x 46 mm. Weight - 592g
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757