|
|
|
GL220
midi Logger/Chart Recorder
|
|
Description |
|
|
|
The
GL220 is the next generation midi logger following on from the
success of the GL200 & GL200A models. With 10 fully isolated
multi-function inputs and internal 3.5MB of non-volatile flash
memory, this logger has an exceptional cost to performance ratio.
With its large format colour display, you can easily set up and
capture data with the ability to monitor waveforms and digital values
during measurements. Its instant replay function makes it easy to
review data that has been captured to internal memory or removable
USB memory stick storage. Standard PC interface makes GL220
accessible through USB.
|
|
Product |
|
|
|
|
|
|
|
Handy
Logger with huge 2GB Flash Memory |
|
|
|
|
10
isolated channels, each with multifunction input
Its
compact size contains an isolated input system which ensures that
signals are not corrupted by inputs to other channels, thus
eliminating wiring concerns. The GL220s multi-type inputs are
suitable for voltage, temperature, humidity, pulse, and logic
signals, enabling combined measurements of different phenomena like
temperature/humidity and voltage.
|
|
|
|
Maximum
sampling rate of up to 10ms
Provides
faster sampling rates for voltage measurements. Can achieve 10ms
sampling interval when limiting the number of channels in use.
X:
selection is available, N/A: selection is not available.
*2:
For humidity measurements, the 0-1V range and scaling function are
used to display results directly in Relative Humidity. Sampling rate
limitations are same as those for voltage measurement.
Large
easy-to-read 4.3-inch wide TFT color LCD
Utilises
a bright clear 4.3-inch wide TFT colour LCD monitor (WQVGA: 480 x
272 dots). Makes it easy to read data in waveform or digital form and
to check your measurement parameter settings. The background color of
the screen can be set to black or white.
|
Waveform
display (Analogue + Digital) |
Dual
display (Current + Past) |
|
Waveform
display (Analog only) |
Digital
display |
|
|
Built-in
2GB Flash Memory for reliable long term measurement
The
2GB Flash Memory enables secure long term data measurement without
using an external storage device. Data is retained even when power is
turned off because flash memory is used.
Capturing
time*4 (10 Analogue channels being used.)
*4:
The above figures are approximate.
*5:The
sampling rate is limited by the number of channels in use. (10ms:
1ch, 50ms: 5ch)
*6:
Standard USB memory devices without high-end functions such as
fingerprint recognition are required.
Hot-swappable
USB memory sticks
Also
supports popular USB memory sticks for external storage. The GL220
saves measured data directly to USB memory sticks. USB memory sticks
can be replaced during measurement without data loss.
|
Ring
memory function
The
most recent data is saved when internal memory or external memory is
configured in ring memory mode. Captured data size in ring memory
mode is limited to 1/3 of available memory.
Easy
operation and device setup
Ergonomically
designed and easy to operate, just like a mobile device. The
input/output terminals and keybord layout are arranged so that it can
be operated in hands-on mode even when recording data. Parameters in
the AMP settings menu can be easily changed whilst viewing the waveform.
|
 |
|
|
|
|
|
Software |
|
|
|
|
|
Easy
connection to PC
The
GL220 can be controlled by a PC if connected by USB cable, allowing
transfer of data to a PC in real-time. If you need to move large data
files to your PC then the GL220 can emulate an external USB drive for
quick data transfer.
Up
to 10 units can be connected to 1 PC. Measurements can be performed
simultaneously or independently
|
|
Various
measurement screens
Select
from 4 screens such as the Y-T (waveform + digital), Y-T (large
waveform), digital view and report view to display measurements in
real time. The direct-Excel function enables captured data to be
written directly to an Excel file.
|
|
|
Data
replay screens
Three
screens such as the Y-T (waveform), digital and the X-Y graph for
specified data are available to view measurements in replay mode. The
maximum, minimum, average and peak-to-peak vales between cursors are
indicated in the digital display screen.
|
|
|
Simple
configuration screens
The
number of configuration screens has been reduced to five. Parameters
can be set easily while viewing measured waveforms.
Useful
functions
Post-process
your captured data with useful functions for arithmetic calculation,
statistical calculation, search and file format conversion. |
 |
|
|
|
|
|
|
|
Phone
+44(0)115 925 8412 | Fax +44(0)115 925 9757 |