EDAM-9052 - Ethernet 8 digital inputs and 8 high power MOSFET outputs

EDAM-9052 - Ethernet 8 digital inputs and 8 high power MOSFET outputs
Zoom  Zoom
Our Price:  £109.00(£130.80 Inc. VAT)

Digital Inputs:  8
Digital Outputs:  8

Availability:  

Incoming, 10-14 days  

Incoming, 10-14 days

The eDAM-9052 is a member of the eDAM-9000 range of industrial Ethernet Modbus TCP data acquisition and control units. The eDAM-9052 has 8 digital inputs and 8 high power open-collector transistor outputs. The inputs can also be used as pulse counters, useful for utility metering applications. The eDAM-9050 connects to standard 10/100 LAN via a RJ45 connector and supports the popular Modus/TCP protocol or simple ASCII for easy integration with most SCADA systems. Also features built-in web server for simple monitoring and control.


Special Offer:  Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.

  • 8 opto-isolated digital inputs
  • Contact closure or voltage input;
    • logic level 0: 0~10V
    • logic level 1: 10~30V
  • Inputs can also operate as 32-bit 1kHz pulse counter
  • Isolation Voltage: 2000Vdc
  • 8 x High Power Digital Outputs
  • Source output 10-30VDC at 1A
  • Each channel supports 5KHz pulse output
  • Protocol - Modbus/TCP or simple ASCII commands
  • Built-in Webserver
  • LED indication for power and Ethernet Link status
  • Power input 10~30VDC (unregulated)
  • Full opto-isolation to 3750Vrms
  • DIN Rail mount
The eDAM-9052 is a high-density I/O module built-in a 10/100 based-T interface for seamless Ethernet connectivity. It provides 8 digital input and 8 digital output channels with 5000VRMS Isolating protection. All of the Digital Input channels support input latch function for important signal handling. The digital input channels can also be used as 1 KHz pulse counters. The Digital Output channels can switch large loads, 60VDC at up to 1A each The outputs can also support a programmable pulse output function.

The eDAM-9052 connects to standard 10/100 LAN via a RJ45 connector and supports the popular Modus/TCP protocol for easy integration with most SCADA systems such as DAQFactory. Also features built-in web server for simple monitoring and control.

 

EDAM Ethernet I/O Utility Overview

The Utility software offers a graphical interface that helps you configure the EDAM-9000 modules. It is also very convenient to test and monitor your remote DAQ system.

Module IP - shows all detected devices on the Network. Using this TAB, it is possible to select a device, and configure IP address etc.

Stream/Event IP - In addition to TCP/IP communication protocol, EDAM-9000 supports UDP communication protocol to regularly broadcast data to specific host PCs. Click the tab of Data Stream, then configure the broadcasting interval and the specific IP addresses which need to receive data from the specific EDAM-9000 I/O module. This UDP Data Stream function broadcasts up to 8 host PCs simultaneously, and the interval is user-defined from 50ms to 7 Days.

Test - Used to view the input status and set outputs. 

Input Settings - Used to select the input mode;

  • Direct input
  • Counter - set to a pulse counter with a 1kHz max pulse count rate
  • Frequency - set to count pulses but set to report back as a frequency
  • Low to high and high to low ltach
 

Output Settings - used to specify output type;

  • Direct Output
  • Pulse Output - the user can set the low and high periods (in ms), the frequency and the number of output pulses
  • Low to high and hih to low latches

Built-in Webserver

The eDAM-9000 I/O modules all feature a built-in web server. A remote computer can monitor and control I/O status on any eDAM-9000 modules remotely through web browser by simply entering the eDAM-9000 IP address is the browser bar.

Programming 

There are several way to communicate with the eDAM-9000.

ASCII commands - Command Syntax: [delimiter character][address][channel][command][ data][checksum][carriage return]

MODBUS/TCP - standard MODBUS read/write commands are supported - please see manual


Downloads

EDAM-9000 Manual >>

EDAM-9000 Software and Utilities >>

EDAM-9000 with DAQFactory Software >>


Customers who bought this item also bought:


Continue ShoppingTell a Friend