Home > Data Acquisition and Control > Ethernet > Relay and Digital IO
Digital Inputs: 14Digital Outputs: 2
4 in stock, immediate despatch
The eDAM-9051 is a member of the eDAM-9000 range of industrial Ethernet Modbus TCP data acquisition and control units. The eDAM-9051 has 12 digital inputs and 2 open-collector transistor outputs. The inputs can also be used as pulse counters, useful for utility metering applications. It also has 2 dedicated high-speed pulse counter channels. The eDAM-9050 connects to standard 10/100 LAN via a RJ45 connector and supports the popular Modus/TCP protocol or simple ASCII for easy integration with most SCADA systems. Also features built-in web server for simple monitoring and control.
The eDAM-9051 connects to standard 10/100 LAN via a RJ45 connector and supports the popular Modus/TCP protocol for easy integration with most SCADA systems such as DAQFactory. Also features built-in web server for simple monitoring and control.
EDAM Ethernet I/O Utility Overview
The Utility software offers a graphical interface that helps you configure the EDAM-9000 modules. It is also very convenient to test and monitor your remote DAQ system.
Module IP - shows all detected devices on the Network. Using this TAB, it is possible to select a device, and configure IP address etc.
Stream/Event IP - In addition to TCP/IP communication protocol, EDAM-9000 supports UDP communication protocol to regularly broadcast data to specific host PCs. Click the tab of Data Stream, then configure the broadcasting interval and the specific IP addresses which need to receive data from the specific EDAM-9000 I/O module. This UDP Data Stream function broadcasts up to 8 host PCs simultaneously, and the interval is user-defined from 50ms to 7 Days.
Test - Used to view the input status and set outputs.
Input Settings - Used to select the input mode;
Output Settings - used to specify output type;
The eDAM-9000 I/O modules all feature a built-in web server. A remote computer can monitor and control I/O status on any eDAM-9000 modules remotely through web browser by simply entering the eDAM-9000 IP address is the browser bar.
MODBUS/TCP - standard MODBUS read/write commands are supported - please see manual
EDAM-9000 Manual >>
EDAM-9000 Software and Utilities >>
EDAM-9000 with DAQFactory Software >>
Customers who bought this item also bought:
DR-30-24 24Vdc 1.5A PSU DIN Rail Power Supply£39.00
PROFILAB-EXPERT - Graphical Data Acquisition Programming Package£99.00
DAQFACTORY-BASE - 64 Tag£429.00