EDAM-9060A - Ethernet 5 digital inputs and 3 Relay Outputs

EDAM-9060A - Ethernet 5 digital inputs and 3 Relay Outputs
Zoom  Zoom
Our Price:  £109.00(£130.80 Inc. VAT)

Digital Inputs:  5
Digital Outputs:  3

Availability:  

2 in stock, immediate despatch  

2 in stock, immediate despatch

The eDAM-9060A is a member of the eDAM-9000 range of industrial Ethernet Modbus TCP data acquisition and control units. The eDAM-9060A has 5 digital inputs and 3 relay outputs, 2 of which have change-over contacts. The inputs can also be used as pulse counters, useful for utility metering applications. The eDAM-9060A connects to standard 10/100 LAN via a RJ45 connector and supports the popular Modus/TCP protocol or simple ASCII for easy integration with most SCADA systems. Also features built-in web server for simple monitoring and control.


Special Offer:  Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.

  • 5 opto-isolated digital inputs
  • Contact closure or voltage input;
    • logic level 0: 0~10V
    • logic level 1: 10~30V
  • Inputs can also operate as 32-bit 500Hz pulse counter
  • Isolation Voltage: 2000Vdc
  • 3 Relay Outputs - 1 x form A (normally open) and 2 x form C (change-over contacts)
  • Relay contact rating: 0.6A @ 125VAC, 2A@ 30VDC
  • Protocol - Modbus/TCP or simple ASCII commands
  • Built-in Webserver
  • LED indication for power and Ethernet Link status
  • Power input 10~30VDC (unregulated)
  • Full opto-isolation to 3750Vrms
  • DIN Rail mount
The eDAM-9060A is a high-density I/O module built-in a 10/100 based-T interface for seamless Ethernet connectivity. It provides 5 digital input and 3 relay output channels. All of the Digital Input channels support input latch function for important signal handling. The digital input channels can also be used as 500Hz pulse counters. The Relay Output channels can switch loads, 30VDC at up to 2A each.

The eDAM-9060A connects to standard 10/100 LAN via a RJ45 connector and supports the popular Modus/TCP protocol for easy integration with most SCADA systems such as DAQFactory. Also features built-in web server for simple monitoring and control.

EDAM Ethernet I/O Utility Overview

The Utility software offers a graphical interface that helps you configure the EDAM-9000 modules. It is also very convenient to test and monitor your remote DAQ system.

Module IP - shows all detected devices on the Network. Using this TAB, it is possible to select a device, and configure IP address etc.

Stream/Event IP - In addition to TCP/IP communication protocol, EDAM-9000 supports UDP communication protocol to regularly broadcast data to specific host PCs. Click the tab of Data Stream, then configure the broadcasting interval and the specific IP addresses which need to receive data from the specific EDAM-9000 I/O module. This UDP Data Stream function broadcasts up to 8 host PCs simultaneously, and the interval is user-defined from 50ms to 7 Days.

Test - Used to view the input status and set outputs. 

Input Settings - Used to select the input mode;

  • Direct input
  • Counter - set to a pulse counter with a 1kHz max pulse count rate
  • Frequency - set to count pulses but set to report back as a frequency
  • Low to high and high to low ltach
 

Output Settings - used to specify output type;

  • Direct Output
  • Pulse Output - the user can set the low and high periods (in ms), the frequency and the number of output pulses
  • Low to high and hih to low latches

Built-in Webserver

The eDAM-9000 I/O modules all feature a built-in web server. A remote computer can monitor and control I/O status on any eDAM-9000 modules remotely through web browser by simply entering the eDAM-9000 IP address is the browser bar.

Programming 

There are several way to communicate with the eDAM-9000.

ASCII commands - Command Syntax: [delimiter character][address][channel][command][ data][checksum][carriage return]

MODBUS/TCP - standard MODBUS read/write commands are supported - please see manual


Downloads

EDAM-9000 Manual >>

EDAM-9000 Software and Utilities >>

EDAM-9000 with DAQFactory Software >>


Continue ShoppingTell a Friend