EDAM-9015 - Ethernet 7 Channel RTD Input DAQ Unit

EDAM-9015 - Ethernet 7 Channel RTD Input DAQ Unit
Zoom  Zoom
Our Price:  £149.00(£178.80 Inc. VAT)

Analogue Inputs:  7

Availability:  

2 in stock, immediate despatch  

2 in stock, immediate despatch

The eDAM-9015 is a member of the eDAM-9000 range of industrial Ethernet Modbus TCP data acquisition and control units. The eDAM-9015 can accept up to 7 3-wire platinum resistance thermometers. The eDAM-9015 connects to standard 10/100 LAN via a RJ45 connector and supports the popular Modus/TCP protocol or simple ASCII for easy integration with most SCADA systems. Also features built-in web server for simple monitoring and control.


Special Offer:  Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.

  • 7 Isolated RTD inputs at 16-bits
  • lnput type: PT100, PT1000, Balco 500 & Ni
    • PT100 -50 ~ 150°C ,0 ~ 100°C ,0 ~ 200°C ,0 ~ 400°C ,-200 ~ 200°C ,
    • PT1000 -40 ~ 160°C
    • Balco 500 -30 ~ 120°C
    • Ni -80 ~ 100°C ,0 ~ 100°C
  • Sampling rate: 12 Samples/Sec. (Normal Mode)
  • Accuracy - ±0.1% or better
  • Overvoltage Protection: +/-35V
  • Isolation Voltage: 2000Vdc
  • Communication - 10/100 Based-T Ethernet
  • Protocol - Modbus/TCP or simple ASCII commands
  • Built-in Webserver
  • LED indication for power and Ethernet Link status
  • Power input 10~30VDC (unregulated)
  • Full opto-isolation to 3750Vrms
  • DIN Rail mount

The EDAM-9015 is a 16-bit, 7-channel RTD input module that provides programmable input ranges on all channels. It accepts Various 2 or 3 wire RTD inputs (PT100, PT1000, Balco 500 & Ni) and provides data to the host computer in °C or °F engineering units.

The eDAM-9015 connects to standard 10/100 LAN via a RJ45 connector and supports the popular Modus/TCP protocol for easy integration with most SCADA systems such as DAQFactory. Also features built-in web server for simple monitoring and control.

EDAM Ethernet I/O Utility Overview
 

The Utility software offers a graphical interface that helps you configure the EDAM-9000 modules. It is also very convenient to test and monitor your remote DAQ system.

Module IP - shows all detected devices on the Network. Using this TAB, it is possible to select a device, and configure IP address etc.

Stream/Event IP - In addition to TCP/IP communication protocol, EDAM-9000 supports UDP communication protocol to regularly broadcast data to specific host PCs. Click the tab of Data Stream, then configure the broadcasting interval and the specific IP addresses which need to receive data from the specific EDAM-9000 I/O module. This UDP Data Stream function broadcasts up to 8 host PCs simultaneously, and the interval is user-defined from 50ms to 7 Days.

Input Settings
- Used to specify input ranges, and to set high and low alarm setpoints.

General Settings - Used to show all analogue inputs and digital output status.

Built-in Webserver

The eDAM-9000 I/O modules all feature a built-in web server. A remote computer can monitor and control I/O status on any eDAM-9000 modules remotely through web browser by simply entering the eDAM-9000 IP address is the browser bar.

Programming 

There are several way to communicate with the eDAM-9000.

ASCII commands - Command Syntax: [delimiter character][address][channel][command][ data][checksum][carriage return]

MODBUS/TCP - standard MODBUS read/write commands are supported - please see manual


Downloads

EDAM-9000 Manual >>

EDAM-9000 Software and Utilities >>

EDAM-9000 with DAQFactory Software >>


Customers who bought this item also bought:


Continue ShoppingTell a Friend