CYT-200SC - 2 Port Ethernet to RS232 RS422 RS485 Serial Converter

CYT-200SC - 2 Port Ethernet to RS232 RS422 RS485 Serial Converter
Zoom  Zoom
Our Price:  £72.00(£86.40 Inc. VAT)
Add UK 12V DC Mains PSU:  
Add EU 12V DC Mains PSU:  

RS232 Ports:  2
RS485 Ports:  1
RS422 Ports:  1


1 in stock, immediate despatch  

1 in stock, immediate despatch

The CYT-200SC is a low cost industrial 2-port RS232, RS422 or RS485 serial device server that can make your industrial serial devices network enabled. The CYT-200SC is easy to configure using a simple Web page configuration page. The terminal blocks on the CYT-200SC is used for power connection and/or RS485 operation. The RS232 connection is a standard DB9 male. Supplied with Virtual Serial Port software to seamlessly add Serial ports to your LAN.

  • 2 serial ports
  • COM1
    • 1 x RS-232 via 9-way D male;
      • Speed 1200-230.4kbps
      • Parity - None/Odd/Even
      • 7/8 data bits, 1/2 stop bits
    • 1 x RS422/RS-485 via screw terminal;
      • D+, D-
      • T+, T-, R+. R-
      • Speed 1200-230.4kbps
  • COM2
    • 1 x RS-232 via screw terminal;
      • Speed 1200-230.4kbps
      • Parity - None/Odd/Even
      • 7/8 data bits, 1/2 stop bits
      • RX, TX, GND
  • 100mbps Ethernet speed, RJ45
  • Web page configuration
  • LED status indication (7: Power, RXD, TXD, ACT, ACT2, RXD2, TXD2)
  • Supplied with VCOM Virtual Serial port software
  • Power - 9 ~ 24 DCV, 300 mA - Screw terminals or DC power socket
  • Watch Dog - System never halts
  • Operating Temperature 0-55°C
  • Dimensions 106 x 115 x 28mm
  • Windows, UNIX, LINUX compatible

The CT2-200SC is a 2-port Serial to Ethernet converter that can network-enable your serial devices, such as weigh scales, PLCs, Data acquisition systems, point of sale, bar code scanners, access control systems, gas meters, printers - anything! Configured through software or built-in web-server.

Live Demo >>  (user name: admin, password: admin)

Connect it to your network via a standard RJ45 connector, set-up its' IP address and TCP port number and you are away. With the supplied Virtual Com port software you can simply communicate with your serial device as if it were connected to the back of your PC. Programmers can communicate directly with the CYT-200SC using standard TCP/IP protocols simply pointing to its IP address and TCP Port.

CYT-200 Serial IP Server

A pair of CYT-200SC'ss can be set up in Client-Server mode where they will send serial data between each other without any PC intervention.

ethernet to serial client server

Virtual Serial Port Utility

VCOM is a COM port redirection software application for Windows PC platforms. Its function is to re-direct customer application data destined for a local serial (COM) port on a PC. Rather than going out the local port, the data is transmitted across the Ethernet network using TCP/IP. The BF-430 attached to the network receives the data and presents it on its serial port. Conversely, data into the serial port of the BF-430 is sent back to the customer application via the network to the VCOM  software. The VCOM software then presents the data to the customer application as if it were from a local serial COM port.


One of the main objectives of the VCOM software is to eliminate the need for a customer to modify their application. If the application knows how to connect to a local serial port, it can by default talk to a remote serial port on a device server using the VCOM software. No understanding of how to develop networking software is required.


User Manual >>

Installation Guide >>

IPSearch and VSP Software guide >>

IPSearch Utility >>

Virtual Serial Port Utility >>

Continue ShoppingTell a Friend