EXM-12DC-DA-R-N-HMI - xMessenger PLC with GSM and Ethernet

EXM-12DC-DA-R-N-HMI - xMessenger PLC with GSM and Ethernet
Zoom  Zoom
Our Price:  £279.00(£334.80 Inc. VAT)

Analogue Inputs:  4
Digital Inputs:  4
Digital Outputs:  4


No stock, discontinued  

No stock, discontinued

ELC-USB RievTech PLC USB Programming LeadELC-USB RievTech PLC USB Programming Lead

The RievTech EXM-12DC-DA-R-N-HMI is a low cost solution to Remote Control and Monitoring via your mobile phone or your LAN. The EXM-12DC-DA-R-N-HMI can monitor up 8 digital inputs, 4 of which can be analogue inputs. A SMS alarm message can be sent when inputs exceed preset limits. The user can also interrogate the inputs through SMS messaging. The PLC also has an Ethernet interface so can communicate via Modbus TCP.

  • Low-cost Mini-PLC with GSM/GPRS and Ethernet connectivity
  • 4 line 16 character LCD display
  • Keypad for operator input
  • 64 user programmable LCD screens
  • RJ45 Ethernet Port
  • Quad band GSM for worlwide use
  • Supplied with external plug-in GSM Antenna
  • 4 x Analogue inputs 0-10V 10-bit (10mV resolution) (shared with the 4 digital inputs)
  • 4 x digital inputs
    • Signal 0: 0 - 3 VDC
    • Signal 1: 8 - 24 VDC
    • Input current: < 1.0 mA
    • Input current: > 1.5 mA
    • 2 x high speed counting inputs to 60kHz max (I9 - IC)
    • 2 x inputs - count rate 4Hz max (I1- I6)
  • 2 x Relay
    • Rating: 250VAC/110V DC, Resistive 10A, Inductive 2A
    • Switch Frequency - Mechanism: 10 Hz, Resistor load: 2 Hz, Inductive load: 0.5 Hz
  • 2 x PNP Transistor Output
    • 5-30V DC @ 0.3A
    • Switching frequency - 10Hz resistive, 0.5Hz Inductive
  • 1 x Com port with Modbus Support (via RS232/RS485 programming cable)
  • Extended memory supporting 512 function blocks
  • Supports enhanced function blocks - PWM, PI Control, multiple timers, counters, Maths, etc.
  • Real Time Clock with calender/time switch functions
  • Increase IO count using expansion modules;
    • up to 140 digital inputs
    • up to 130 digital/relay outputs
    • up to 72 analogue inputs - 10V or 4-20mA
    • up to 32 analogue outputs - 10V or 4-20mA
    • up to 72 PT100 temperature sensors
  • Programmed via the FREE xMessenger software
  • Standard Mode - no programming required
    • SMS alert message on digital input state change
    • SMS alert message on analogue input high or low threshold
    • Analogue input can be scaled to engineering units
    • Status report sent in response to user SMS request
    • Status report automatically sent on daily, weekly or monthly timed basis
    • SMS messages complatly user settable
    • SMS messages sent to up to 5 users per input. Total 50 user phone book capacity
    • SMS to switch relay outputs on or off or to pulse relay, seconds to hours
  • Customise Mode - program your own control logic using simple drag-and-drop function blocks
    • Logic functions-AND, OR, NOT, XOR
    • Pre-configured standard functions, e.g. on/ off-delays, pulse  relay ,counters
    • Watchdog function, PI controller etc..
    • Data logging (SD card adaptor optional accessory)
    • GPRS support for real-time monitoring
    • Modbus Master/Slave over LAN or RS485 (optional RS485 module require)
  • Android App
  • DIN rail or screw mount
  • 95mm x 90mm x 67mm
  • Operating temperature; -20° to 55°C
  • Main voltage operation range: 10 - 28 VDC


User Manual >>

xMessenger Programming Software >>

Ethernet Port Device Manager >> 

Modbus RTU >>

Modbus TCP >>

Customers who bought this item also bought:

Continue ShoppingTell a Friend