Home Page

Contact Us

My Basket

Checkout

EMB168 ATMEGA168 SBC Module

Description

 

The EMB168 is an embedded microcontroller board based on ATMEGA128 AVR microcontroller family. It is low cost and flexible, making it ideal as an embedded controller. The board is a DIL header design module so users can fit it to their own PCB's.

 

Product

 

 

 

  • ATMEGA168 AVR Microcontroller,

  • 16KB of In-System Programmable Flash
  • 20MHz for MCU speed
  • 10-bit 8 channels analogue to digital converter
  • 10-bit 2 channels digital to analogue converter, LTC1661
  • RTC, DS1307 with battery
  • 32 KB serial EEPROM, 24LC256
  • RS232 line driver, MAX232
  • RS485 line driver, SN75176
  • Reset switch
  • Supports ISP programming
  • 5V operation
  • 40 pins, look-like DIL
  • Small PCB size
  • BASCOM Compatible
  • Base and expansion boards available

    User Manual >>
     

 

Description

 

The EMB168 is an 8-bit microcontroller module base on the AVR microcontroller. It uses the ATMEGA168 for the main MCU. The module is designed for development and small applications. It allows the user to quickly build their design due to the module consists of many features for support different applications such as MCU speed up to 20MHz, 10-bit 8 channels analog to digital converter, 10-bit 2 channels digital to analog converter, RTC, 32 KB external serial EEPROM, RS232 line driver, RS485 line driver and other. Also this board supports ISP programmin

Compatible with the Atmel AVR Studio Assembler and the BASCOM Basic Complier

 

Accessories and Expansion Boards

 

REL812S - Relay Expansion

 

 

  • 8-Channel Relay Expansion Board

  • Change-over relays
  • Contact Rating 10A @ 120VAC
  • Requires external 12VDC PSU
  • Screw Terminals

Schematic >>

 

IN812C - Opto Input

 

 

  • 8-Channel opto-isolated Input card

  • Selectable input type - DC or volt-free contact
  • 5-24V DC Input Range
  • Connect to SBC via I2C Bus
  • Up to 8 boards per system

Manual >>

BD298 Bi-polar Stepper Motor Driver

 

 

  • Bi-polar stepping motor driver

  • Motor power supply voltage up to 46V
  • Motor current up to 2A
  • Up to 40KHz input signal frequency
  • Over temperature protection
  • Over current protection
  • Free wheeling diodes
  • TTL input signals

Manual >>

MD298 DC Motor Driver

 

  • Dual H-bridge DC motor driver

  • Motor power supply voltage up to 46V
  • DC Motor current up to 2A
  • Up to 40KHz PWM frequency
  • Over temperature protection
  • Over current protection
  • Free wheeling diodes
  • TTL input signals

Manual >>

ISPAVR Programmer

 

 

  • ISP Programmer for AVR Microcontroller

  • Compatible with STK200/300 ISP programmer
  • 10 pin connector
  • DB25 MALE Printer Port (LPT) interface
  • 1m flat cable
  • 2 LED status, Power and Program

Manual >>

BASCOM Basic Complier

 

 

  • Structured BASIC with labels

  • Structured programming with IF-THEN-ELSE-END IF, DO-LOOP, WHILE-WEND, SELECT- CASE
  • Integrated terminal emulator with download option
  • Integrated simulator for testing
  • Integrated ISPAVR programmer support
  • Editor with statement highlighting

More Information >>

Atmel AVR Studio

FREE Download >>

 

 

AVR Studio® 4 is the new professional Integrated Development Environment (IDE) for writing and debugging AVR® applications in Windows® 9x/NT/2000/XP environments.

AVR Studio 4 includes an assembler and a simulator. The following AVR development tools are also supported:

ICE50, ICE40, JTAGICE mkII, JTAGICE, ICE200, STK500/501/502/503/504/505/520, AVRISP mkII, and AVRISP.

 

 

 

Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757