|
The
xLogic SuperRelay is a compact and expandable CPU replacing mini
PLCs, multiple timers, relays and counters. The xLogic SuperRelay
perfectly fits in the space between timing relays and a low-end
PLC's. The ELC-18 range is the advanced level model, incorporating a
good mix of digital and analogue I/O, clock with calender, counters,
timers, LCD, keypad and an expansion port. Easy to configure either
using the LCD and keypad or with drag-and-drop functions blocks using
the FREE ELCSoft software.
ELC-12
Smaller Model >>
|
|
xLogic
SuperRelay is a compact and expandable industrial computer ideal for
replacing older PLCs, multiple timers, counters and traditional relay logic.
The
xLogic SuperRelay is available in 24V DC versions, making it the
ideal solution for relay replacement, or simple control applications
as building and parking lot lighting, managing automatic lighting,
access control, watering systems, pump control, ventilation systems,
home automation and a wide field of other applications demanding low
cost to be a primary design issue.
Available
with a common mix of digital input, digital output, analogue input,
PWM output, high speed pulse counting, Real time clock and time
switch functions. The ELC-18 range offer a 4-line LCD display and
keypad for program modification and display and control whilst the
program is running. An expansion port allows the connection of up to
31 expansion modules, extending the I/O channel count and adding
Ethernet and SMS text communication capabilities.
Programming
the xLogic SuperRelay
The
xLogic SuperRelay series are programmed using simple logic and I/O
function blocks. A total of 8 general function blocks, 29 special
function blocks, and 6 input & output function blocks are
available. Function blocks are selected and dragged onto the
programming area. They are then connected with wires to create your
control program. The software has a simulation facility, so you can
test your program operation and quickly correct any problems. The
program is then uploaded to the ELC unit via the RS232 or USB
programming leads.
Programming
with function blocks is simple, and can be easily performed by
non-programmers. Use the “label tool” to write a comment,
instruction or help note on the xLogic circuit program screen.
Software
Download >>
|