|
The
EDAM-9015 is a 16-bit, 7-channel RTD input module that provides
programmable input ranges on all channels. It accepts Various 2 or 3
wire RTD inputs (PT100, PT1000, Balco 500 & Ni) and provides data
to the host computer in °C or °F engineering units.
The
eDAM-9015 connects to standard 10/100 LAN via a RJ45 connector and
supports the popular Modus/TCP protocol for easy integration with
most SCADA systems such as DAQFactory.
Also features built-in web server for simple monitoring and control.
EDAM
Ethernet I/O Utility Overview
The
Utility software offers a graphical interface that helps you
configure the EDAM-9000 modules. It is also very convenient to test
and monitor your remote DAQ system.
Module
IP - shows all detected devices on the Network. Using this TAB,
it is possible to select a device, and configure IP address etc.
Stream/Event
IP - In addition to TCP/IP communication protocol, EDAM-9000
supports UDP communication protocol to regularly broadcast data to
specific host PCs. Click the tab of Data Stream, then configure the
broadcasting interval and the specific IP addresses which need to
receive data from the specific EDAM-9000 I/O module. This UDP Data
Stream function broadcasts up to 8 host PCs simultaneously, and the
interval is user-defined from 50ms to 7 Days.
Input
Settings - Used to specify input ranges, and to set high and low
alarm setpoints.
General
Settings - Used to show all analogue inputs and digital output status.
Built-in
Webserver
The
eDAM-9000 I/O modules all feature a built-in web server. A remote
computer can monitor and control I/O status on any eDAM-9000 modules
remotely through web browser by simply entering the eDAM-9000 IP
address is the browser bar.
|