Home Page Contact Us My Basket Checkout
eDAM 9000 Ethernet Modbus/TCP RTU
Description
The EDAM-9000 range is based on the popular Ethernet networking standards used today in most business environments. Users can easily add EDAM-9000 I/O modules to existing Ethernet networks or use EDAM-9000 modules in new Ethernet-enabled Manufacturing networks. EDAM-9000 module features a 10/100 Mbps Ethernet and supports the popular Modus/TCP protocol. EDAM-9000 also supports UDP protocol over Ethernet networking.
Common Features
User Manual >>	A range of Ethernet remote data acquisition and control units which communicate using MODBUS TCP The eDAM range of modules are used for remote data acquisition and control applications, where the user needs to measure process parameters and control equipment such as pumps and motors some distance from the PC. The modules can be distributed over a wide area, and are connected via a RJ45 Ethernet connection. Supplied with configuration untility program and comprehensive programming examples using VB, Delphi and C++. Can be used with DAQFactory SCADA software and ProfiLab DAQ software as well as any package that supports Modbus/TCP Communication - 10/100 Based-T Ethernet Protocol - Modbus/TCP, TCP/IP, UDP, ICMP and ARP LED indication for power and Ethernet Link status Power input 10~30VDC (unregulated)
Analogue Models
eDAM-9017 8 x Analogue inputs, 2 x Transistor outputs	Analogue 8 Isolated analogue differential input at 16-bits Input Type: mV, V, mA Ranges: ±150mV,±500mV,±1V,±5V,±10V,0-20mA,4-20mA Sampling rate: 10 Samples/Sec. (Normal Mode) Accuracy - ±0.1% or better Overvoltage Protection: +/-35V Isolation Voltage: 3000Vdc Digital  2 x Digital Outputs Open collector to 30V, 100mA(maximum load)
eDAM-9019 8 x thermocouple inputs, 2 x Transistor outputs	Analogue 8 Isolated differential thermocouple input at 16-bits Ranges: J type: 0~760 oC K type: 0~1370 oC T type: -100~400 oC E type: 0~1000 oC R type:500~1750 oC S type:500~1750 oC B type: 500~1800 oC Sampling rate: 10 Samples/Sec. (Normal Mode) Accuracy - ±0.1% or better Overvoltage Protection: +/-35V Isolation Voltage: 3000Vdc Digital  2 x Digital Outputs Open collector to 30V, 100mA(maximum load)
eDAM-9015 7 x RTD inputs	7 Isolated 3-wire RTD input at 16-bits Input Type: Pt100,Pt1000,Ni RTD Ranges: Pt100 (-50~150C, 0~100C, 0~200C, 0~400C,-200~200C) Pt1000(-40~160C) Ni518(-80~100C) Sampling rate: 10 Samples/Sec. (Normal Mode) Accuracy - ±0.1% or better Overvoltage Protection: +/-35V Isolation Voltage: 3000Vdc
Digital Models
eDAM-9050 12 x digital/counter inputs, 6 x transistor outputs	Digital Input 12 opto-isolated input Contact closure or voltage input; logic level 0: 0~10V logic level 1: 10~30V inputs also operate as 3kHz counter Accuracy - ±0.1% or better Isolation Voltage: 2000Vdc Digital 6 x Digital Outputs Open collector to 30V, 100mA(maximum load) Each channel supports 5KHz pulse output
Software
EDAM Ethernet I/O Utility Overview The Utility software offers a graphical interface that helps you configure the EDAM-9000 modules. It is also very convenient to test and monitor your remote DAQ system.
Programming Examples Supplied with a DLL and ActiveX together with programming examples for Visual Basic 6.0, Visual C++ 6.0, Borland C++ Builder 5.0 and Delphi 4.00.
DAQFactory SCADA Package Control and monitoring software DAQFactory can be used with eDAM 9000 units. DAQFactory can be used to create an opertor interface, with plant mimics, chart recorders, provide automatic control, PID loops, alarms and datalogging and reporting functions. chart displays, bar charts and dynamic images create an operator HMI on-line statistical analysis and full maths capability automation sequences provide process control capability easy-to-use, no programming knowledge required versions with image library, web-server, and much more More Information >>
ProfiLab-Expert - graphical programming software package for data acquisition and control applications Low cost graphical programming software package Optimised for data acquisition and control applications Wide range of control, display and maths function blocks. Programs are “written” by wiring function blocks together Create multi-page operator interfaces LED, numeric, meter, bar, chart , button, switches, panel controls Compile programs to executables without any run-time penalty Talk to the eDAM-9000 range via Modbus TCP More Information >>
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757