Home Page Contact Us My Basket Checkout
eDAM 8000 Remote Terminal Units
Description
A range of serial port RS485 remote data acquisition and control units, compatible with the ADAM 4000 series units and equivalents. The eDAM range of modules are used for remote data acquisition and control applications, where the user needs to measure process parameters and control equipment such as pumps and motors some distance from the PC. The modules can be distributed over a wide area, and are connected to the PC via a simple 4-wire connection using a RS485 interface. The network of eDAM modules is connected to the PC's serial port via a RS232 to RS485 converter. Any number of eDAM modules can be connected in any mix. Supplied with configuration untility program and comprehensive software development kit. Can be used with DAQFactory SCADA software. LabVIEW and Intouch drivers under development.
Analogue Models
eDAM-8012 User Manual >>	1 Isolated analogue differential input channel Input Type: mV, V, mA Sampling rate: 10 Samples/Sec. (Normal Mode)100 Samples/Sec.(Fast Mode) Isolation Voltage: 3000Vdc 2 channels digital output with Open collector to 30V 1 digital input channel Event Counter: Max. input Frequency to 50Hz Interface: RS-485, 2 wires Speed(bps): 1200 ~ 115.2K Power input: +10V ~ +30VDC Power Consumption: 1.4W(8012), 2.0W(8012D)
eDAM-8017 User Manual >>	8 Isolated analogue differential input or 6 differential and 2 single-ended Input Type: mV, V, mA Sampling rate: 10 Samples/Sec. (Normal Mode) 75 Samples/Sec.(Fast Mode) Overvoltage Protection: +/-40V Isolation Voltage: 3000Vdc Interface: RS-485, 2 wires Speed(bps): 1200 ~ 115.2K Power input: +10V ~ +30VDC Power Consumption: 1.2W
eDAM-8018 User Manual >>	8 Isolated analogue differential input or 6 differential and 2 single-ended Input Type: Thermocouple, mV, V, mA Thermocouple Type: J, K, T, E, R, S, B, N, C Sampling rate: 10 Samples/Sec. (Normal Mode) Bandwidth : 15.7 Hz Overvoltage Protection: +/-40V Isolation Voltage: 3000Vdc Interface: RS-485, 2 wires Speed(bps): 1200 ~ 115.2K Power input: +10V ~ +30VDC Power Consumption: 1.2W
Digital Models
eDAM-8041 User Manual >>	14 isolated digital inputs - single ended Logical level 0 :+1V Max. Logical level 1 :+3.5V ~ +30V Internal watchdog timer :150ms Input impedance :3K ohms Isolation voltage :3,750 Vrms Status indicator :14 input status LED display Interface: RS-485, 2 wires Speed(bps): 1200 ~ 115.2K Power input: +10V ~ +30VDC Power Consumption: 1.2W
eDAM-8042 User Manual >>	13 isolated common ground open collector output Maximum current sink :100 mA per channel Output load volatge :30Vdc max Max. power dissipation :800 mW Isolation Voltage :3,750 Vrms Status indicator :13 output status LED display Internal watchdog timer :150 msec Interface: RS-485, 2 wires Speed(bps): 1200 ~ 115.2K Power input: +10V ~ +30VDC Power Consumption: 1.2W
eDAM-8044 User Manual >>	16 non-isolated digital output channels (Open collector) - all channels are Single Ended with Common Ground. Max. output load voltage: 30VDC Max. output current sink: 100mA LED: 16 digital output status LED Interface: RS-485, 2 wires Speed(bps): 1200 ~ 115.2K Power input: +10V ~ +30VDC Power Consumption: 1.2W
eDAM-8060 User Manual >>	4 relay output channels - 2 off SPST, 2 off SPDT Ratings: AC250V @0.3A, DC:30V @2A; 4 isolated input channels with common power logical level 0 :+1V Max, logical level 1 :+3.5V ~+24V Input counter :Counting pulse from channel 4 input (100Hz Max) Status indicator :8 input status LED displays Interface: RS-485, 2 wires Speed(bps): 1200 ~ 115.2K Power input: +10V ~ +30VDC Power Consumption: 1.2W
eDAM-8065 User Manual >>	5 SSR output channels Ratings: AC:24~265V @1A 4 isolated input channels with common power logical level 0 :+1V Max, logical level 1 :+3.5V ~+24V Input counter :Counting pulse from channel 4 input (100Hz Max) Status indicator :8 input status LED displays Interface: RS-485, 2 wires Speed(bps): 1200 ~ 115.2K Power input: +10V ~ +30VDC Power Consumption: 1.2W
eDAM-8067 User Manual >>	7 SPST Relay output channels Ratings: 120VAC @0.5A; 24VDC @1A Status indicator :8 input status LED displays Interface: RS-485, 2 wires Speed(bps): 1200 ~ 115.2K Power input: +10V ~ +30VDC Power Consumption: 1.2W
Converter Models
eDAM-8520	RS232 to RS485 Converter Status indicator :2 comms status LED displays Interface: RS-485, 2 wires Speed(bps): 1200 ~ 115.2K Power input: +10V ~ +30VDC Power Consumption: 1.2W
USB-i485 User Manual >>	USB to RS422/485 Converter Virtual serial port driver. Supports Windows 98/ME/XP/2000/CE, MAC & Linux Field Interfaces: RS485 Half Duplex (dual buses), RS485 Full Duplex or RS422. Jumper selected RS485 / RS422. Automatic flow control for RS485 Half Duplex. 120 Ohms internal resistors termination enabled by jumpers. Transmission rate: from 300 bps to 1Mbps.on bus
eCOV-132	Ethernet to RS422/485 Converter 1 x RS-422/RS-485 via removable screw termial; RX+, RX-, TX+, TX- Speed 300-115.2kbps 10/100mbps Ethernet speed, RJ45 Metal Housing, suitable for industrial applications. LED status indication (Power, Tx, Rx, Lan) Supplied with Virtual Serial port software
Software
Included with each card; Software Toolkit (DLL, ActiveX) for Windows 98/2000/NT/XP Many Visual Basic, C++, Delphi etc. examples Software Toolkit for Labview, Wonderware Intouch under development DAQFactory Driver and examples Control and monitoring software DAQFactory can now be used with eDAM 8000 units. DAQFactory can be used to create an opertor interface, with plant mimics, chart recorders, provide automatic control, PID loops, alarms and datalogging and reporting functions.
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757