AR580-I - Thermocouple, PT100 to 4-20mA Transmitter

AR580-I - Thermocouple, PT100 to 4-20mA Transmitter
Our Price:  £49.00(£58.80 Inc. VAT)



1 in stock, immediate despatch

AR956 USB Programming CableAR956 USB Programming Cable

The AR580 is a programmable temperature transmitter accepting a Pt100 or thermocouple (type J, K, S, N, E) temperature sensor input and converting to a 0/4-20mA current output signal.A budget unit without galvanic isolation. DIN rail mount.


Special Offer:  Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.

  • linear processing of the measured temperature into a current or voltage signal
  • input (programmable):
    • PT100 resistance thermometer
    • thermocouple: type J, K, S, N, E
  • output:
    • current 4-20mA (2-wire with power supply in current loop)
  • no galvanic separation input / output
  • housing for mounting on TS35 strip (DIN rail)
  • input type, processing range and other processing parameters configured with AR950 handheld programmer or AR956 USB cable and ARsoft-CFG software
  • processing ranges: any in the input measuring range
  • error LED indicator
  • high accuracy and immunity to interference
  • response time (10-90%): 900ms, programmable in the range of 350-1600ms
  • power supply:
    • 10-36 Vdc for current output
  • operating temperature range: 0-65 °C
  • relative humidity range: 0-90 %RH (no condensation)
  • ingress protection rating: IP20
  • weight: approx. 20 g


ARsoft-CFG application allows you to configure and readout current measurements carried out by AR series devices (controllers, meters, transducers, recorders, etc.) equipped with communication interface RS232, RS485, USB or Ethernet.

The application has the following features:

  • visualization of all available measurements for the selected type of device
  • fast, on-line editing of device parameters
  • window for configuring parameters includes textual descriptions of parameters and their range of variation
  • reading and recording device configuration with an option of text edition of the created file.

Hardware requirements:

  • Operating System: Windows 7/8/10
  • depending on the type of communication interface of the device connected:- COM port RS232 or RS485 (it is also possible to use converter from USB to RS232/RS485)- USB port- Ethernet network card


User Manual >>

ARsoft-CFG  Software >>