|
|
|
Damocles
2404 Ethernet I/O unit
|
|
Description |
|
|
|
The
Damocles 2404 is an Ethernet based digital I/O alarm and control
unit. It contains 4 relay outputs and 24 opto-isolated digital inputs
which can be used to trigger email alarms. The inputs can also be
configured as pulse counters, ideal for monitoring the output from
flow, electricity, water and gas meters. Option temperature sensors
can be connected via a dedicated RS232 interface.
You
can monitor input status and control the relay outputs through your
web browser or through software by using standard protocols such as
Modbus TCP.
|
|
Product |
|
|
|
|
|
|
|
Description |
|
|
The
Damocles 2404 contains 4 relays outputs and 24 opto-isolated inputs
for connect the contact. You can monitor the values and control the
outputs with your web browser or software using standard standard protocol.
On
input state change, the Damocles 2404 will send an email or SNMP
Trap. With the free supplied software, you can log the messages or
redirect via SMS in GSM network.
All
inputs have the pulse counters. You can connect contact outputs from
utility meters (electricity, water, gas).
|
|
 |
|
Once
the Damocles-MINI is connected to the Ethernet, you can run the free
UDP setup utility, which will serch the LAN to find all attached
devices. You can then specify your desired Network address
parameters. Once this is done, you can simply acces the I/O data from
a web browser. There is also a flash-based version - On-line
Demo >>.
Alarms
and Alarm Alert via Email
The
Damocles-MINI supports "Single Alarm“ and "Group
Alarm“ modes;
-
Single
Alarm - you can configure each input to alarm on state change either
from contact make-to-break or from break-to-make. The alarm can be
sent to up to 2 separate email address or up to 4 SNMP trap destinations.
-
Combinations
of inputs can be specified as an Alarm condition in addition to the
single alarm.
Software
The
Damocles-MINI is supplied with a free SDK (Software Development Kit)
library with examples (Visual Basic, Delphi, C++, .NET ...). The
Damocles-MINI can also be controlled by any 3rd-party software that
supports Modbus TCP/IP. More
Information
Here >>
|
|
Specifications |
|
|
|
|
Ethernet
port |
|
Interface |
RJ45
(10BASE-T) 10 Mbit or 10/100 Mbit network compatible |
|
Supported
protocols |
IP:
ARP, TCP/IP (HTTP, Modbus over TCP), UDP/IP (SNMP) |
|
SNMP
compatibility |
Ver:1.00
compatible, some parts of the ver 2.0 implemented |
|
|
|
Digital
inputs |
|
24x
Contact inputs |
Galvanic
isolated 5-20V, max distance 30m,connect it with a contact directly
(dry contact). |
|
|
|
Digital
outputs |
|
2x
Relay contacts |
up
to 5A/110V AC or 5A/24V DC
1x
NC and 1x NO for every output |
|
|
|
LED
Status indicators |
|
POWER |
Green
- power OK |
|
LINK
& Activity |
Green
- Ethernet connectivity |
|
|
|
DIP
SWITCH configuration |
|
DIP1 |
ON
= RS-232 Setup mode over Port 1 (RS-232 mode only) OFF = Run mode |
|
DIP2
- Security |
ON
= Security mode - remote configuration disabled
OFF
= Non-Security mode - remote configuration enabled |
|
|
|
Physical
parameters |
|
Voltage
requirements |
12-24
V/ 600 mA DC- coaxial power connector (barrel), GND on the shield |
|
Dimensions |
40
x 140 x 80 [mm] (H x W x D ) |
|
Weight |
500
g |
|
|
|
Functional
parameters |
|
Device
SETUP configuration possibilities |
-
UDP
Config
- IP address assign via UDP
-
TCP
Setup
- Terminal configuration and sensors management
-
WWW
Setup
- HTTP Flash application
-
SNMP
(just for some parameters) |
|
|
|
|
|
|
|
Phone
+44(0)115 925 8412 | Fax +44(0)115 925 9757 |