Secure Payments by PayPal

 


 

Owon SDS7102 Bench Oscilloscope 100MHz 1GSPS

Owon SDS7102 Bench Oscilloscope 100MHz 1GSPS
Zoom  Zoom
Our Price:  £419.00
List Price:  £465.00
(Exc. 20% VAT)
Add Battery:  

Channels:  2
Bandwidth:  100MHz
Sampling Rate:  1GSPS

Availability:  

Special order, 1-2 days  

Special order, 1-2 days

The "Deep Memory" SDS7102 100 MHz bandwidth 2 channel digital storage oscilloscope with a 1GSa/s sample rate and a massive 8 inch colour TFT-LCD screen with 800 x 600 resolution offers huge amounts of memory, and USB flash storage support. The unit contains 2 passive probes that are switchable between 1:1 and 10:1 input ratio. Also included are a USB cable, power adapter, user manual, and the software cd. Now with a VGA port for external displays!


  • Bandwidth: 100MHz
  • Sample rate (Real time): 1GSa/s
  • Horizontal Scale (S/div): 5ns/div ~ 100s/div step by 1~2~5
  • Vertical Resolution: 8-bit
  • Rise time (at input, typical): ≤5.8ns
  • Channels: Dual
  • Display: 8 inch colour LCD, TFT screen, 800x600 pixels
  • Input Impedance: 1M±2% in parallel with 15pF±5pF
  • Record Length: Max.10M points for each channel
  • Vertical Sensitivity: 2mV/div#10V/div(at input)
  • Cursor read-out
  • 20 automatic measurement functions
  • Autoscale function
  • 8 inch Color (TFT) LCD with high contrast
  • Ability to store 15 waveforms
  • Automatic setting function
  • Multiple waveform calculation function
  • Can detect the average and peak values of a waveform
  • Edge, Pulse, Video, Slope, Alternate trigger functionality
  • Pass/Fail Function, optically isolated Pass/Fail output
  • FFT Function
  • USB communication port
  • VGA output for projection use
  • Multiple language user interface
  • Optional Lithium battery (4 hours of operation time)
  • Dimension: 340mm× 155mm×70mm
  • Weight approx:  2kgs

The SDS7102 is a new, two-channel benchtop scope with a huge 10MSa record length for each channel, allowing zooming capability for investigating fast, intermittent pulses.  This low-cost versatile scope samples at 500MSa/s and is packed with useful features normally only seen on higher-end DSOs, including deep memory, external, video-capable trigger, auto-measurements, auto-scaling, large 8" full colour LCD display, XY mode, auto-set, averaging, math functions, USB output, waveform storage, pass/fail output and a 3-year warranty.   Even FFT functionality is included for frequency spectrum display.   The SDS7102 comes in a sleek, slim case and can even be fitted with an optional battery, ideal for field or isolated operation.
  • Autoscale can automatically adjust the vertical gain, or the horizontal time base, or both together.  This is useful for circuit probing -- as the probe is moved from point to point on a circuit board, the display auto-adjusts for best trace presentation.  It functions in the same manner as 'AutoSet', but instead of being a one-time function, it's active until turned off, keeping “hands-free.”  
  • FFT allows instant display the frequency spectrum of the signal under test.
The SDS7102 can automatically measure and display frequency and peak-peak/rms/mean values, but cursors can also be moved to make individual readings.  A built-in self-calibration facility improves measurement accuracy.  Video monitoring is also possible since you can trigger on NTSC/PAL/SECAM line or field waveforms.  SDS7102  features include: manual cursor measurements, up to 19 automatic measurements (including frequency), high-speed screen update, storage for up to 15 waveforms and set-up parameters, convenient USB serial interface with PC software, 400V (DC+AV peak) maximum input, optional rechargeable battery pack and multi-language capabilities.

This lightweight scope is perfect for any engineer’s or student’s desk. The USB master and slave connections make printing or storing results easy too. With a large 7.8” 640 x 480 color TFT-LCD, this scope is small enough and light enough to carry anywhere, weighing under 4 lbs. Sensitivity range is 2mV/div to 10V/div with maximum display of ±50V. Another really useful feature is the ability to store up to 15 waveforms for comparison with live inputs.   A persistence control is available too which simulates old analog scopes to compare slow-moving waveforms with previous scans.  ‘A+B’ and ‘A-B’ math capability is included, while the X-Y display feature can be used to reveal phase delays.

 


Downloads

User Manual >>

Software Download >>

 


Continue ShoppingTell a Friend