Industruino - Arduino PLC - 8 Digital IO, 4 Analogue In, 2 Analogue Out, RS485, Expansion

Industruino - Arduino PLC - 8 Digital IO, 4 Analogue In, 2 Analogue Out, RS485, Expansion
  Zoom
Our Price:  £129.00(£154.80 Inc. VAT)
+

Analogue Inputs:  4
Analogue Outputs:  2
Digital Inputs:  8
Digital Outputs:  8
RS485 Ports:  1

Availability:  

  

5 in stock, immediate despatch

Industruino is a fully featured Arduino compatible PLC housed in a DIN-rail mountable case with industrial grade IO, onboard LCD, membrane keypad, RS485 and expansion port. With this product you will be able to permanently install your Arduino application in no-time. Whether you use it for automation projects, data loggers or an interactive art installation, Industruino offers you ruggedness, plenty of features and low cost.


Special Offer:  Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.

  • Uses the Atmel SAMD21G18 MCU Processor (same as the Arduino Zero)
  • 8 Opto-isolated digital IO channels
    • Output - 6.5-32V (supply voltage) @ 2.3A per pin (Short circuit, over-current, over-temp protected)
    • Input - input voltage range: 3.3-32V or dry contact (using power supply as a "wetting" voltage)
  • 4 x 0-10V/4-20mA analogue inputs at 18-bit
  • 2 x 0-10V/4-20mA analogue outputs at 12-bit
  • Flash memory: 256KB (of which 16 KB used by USB/Ethernet bootloader)
  • SRAM: 32KB
  • Clock Speed: 48MHz
  • 1 x RS485 communication port - isolated
  • LCD and keypad Connectors
  • FREE Development tools -  http://arduino.cc
  • DIN Rail Mount
  • Dimensions 71.5mm x 87mm x 58mm
  • Operating Temperature Range: 0-55°C
  • 6.5-32V DC Power

Industruino is a fully featured Arduino compatible PLC housed in a DIN-rail mountable case with industrial grade IO, onboard LCD, membrane keypad, RS485 and expansion port. With this product you will be able to permanently install your Arduino application in no-time.

Whether you use it for automation projects, data loggers or an interactive art installation, Industruino offers you ruggedness, plenty of features and low cost.

The Industruino is an interfacing solution to bridge the gap between Arduino compatibility and the world of PLC, robust industrial sensors and actuators. All field peripherals are isolated from the microcontroller via digital isolators and communicate via i2c protocol. The board includes 8 channels 24V I/O, 4 channel 0-10V/4-20mA at 18bit ADC resolution, 2 channel 0-10V/4-20mA at 12bit DAC resolution, isolated RS485 transceiver, isolated power zones.

The backlit 128 x 64 pixel LCD screen is graphics capable and the 3-key membrane keypad can be used by an operator to navigate menus set outputs and enter values.

Expansion

The Industruino has a 14-pin expansion port for connection to either an Ethernet or GSM/GPRS adaptor to increase its communication capabilities

Ethernet Expansion Module - The Ethernet module is an external expansion module for Industruino. It adds internet connectivity to your existing Industruino installation.

The module is complemented by a Micro-SD card slot and 8KB of non-volatile FRAM memory. The SD memory is ideal for storing large files, such as used in data logging projects. The FRAM memory is ideal for fast and repeated storage of small values such system status and configuration data. The FRAM memory is non-volatile, so it enables you to keep data during power cycling without needing a battery backup.

More Information >>

GSM/GPRS Expansdion Module - The Quad-Band GSM/GPRS module can connect your Industruino to the internet in any remote area with cell coverage. The module is complemented by a Micro-SD card slot and RS-232 communications port. The SD memory is ideal for storing large files, such as used in data logging projects. The RS-232 port can be used to connect the module directly to a PC for software development purposes (eg. quick testing of AT commands), or can be re-routed to a second UART of the Industruino by flipping a switch.

More Information >> 

RS485

The RS485 Port can be used to connect to remote IO units such as our Modbus Remote IO range. Extend the IO count to add more digital or pulse counting, relay outputs, analogue, 4-20mA loop and RTD's or thermocouples. Talk to motor controllers or extract data from third party RS485 devices such as weigh scales or bar code readers.

Add the Industruino to your SCADA system to provide local computing power or as a remote IO station. Or use our DAQFactory software to provide a PC based Supervisory HMI system.

Software

The board is supplied with Arduino libraries, allowing you to easily interface with industrial level sensors and actuators, using your favorite software tools.

For more information about Arduino PLCs and alternative Programming Software, see this application note >>


Downloads

Datasheet >>

User Manual >> 

Pinout Map >>

Arduino IDE >>

Libraries >>

Modbus Master-Slave Libraries >>


Customers who bought this item also bought: