Home Page Contact Us My Basket Checkout
AD-CM-DC Isolated Signal Converter
Description
A low-cost isolated signal conditioner module with DIP selectable input and output ranges. Accepts voltage and current inputs and can generate voltage or current outputs. DIN Rail mount.
Common Features
	Industrial Signal Converter 2000V Opto-Isolation Inputs : 0-5V, 1-5V, 0-10V, 0-60mV,4-20mA, 0-20mA Outputs : 0-5V, 1-5V, 0-10V,4-20mA, 0-20mA Selectable Dip Switch Ranges Low Cost DIN RAIL Mountable Size (WDH) : 95 x 50 x 41 mm Power : DC 24V ±10% (Internal SMPS included) User Manual >>
Ranges
The signal converter AD-CM-DC will convert DC voltage or a direct current inputs to DC voltage or direct current output. Inputs can be set using the SW1 DIP switch. Outputs can be set using the SW2 DIP switch. You may use Y terminal and B terminals for the inputs or the outputs. Input Specifications Input Signal Input Impedence Operating Temp. & Humid. DC 0 to 5V 1M -10 to 50 degrees Celcius, 10 to 95% RH DC 1 to 5V DC 0 to 10V DC 0 to 60mA DC 4 to 20mA 250 DC 0 to 20mA Output Specifications Output Signal Allowable Impedence DC 0 to 5V Minimum of 2K DC 1 to 5V Minimum of 2K DC 0 to 10V Minimum of 4K DC 4 to 20mA Maximum of 500 DC 0 to 20mA Maximum of 500 Input/Output Specifications Factory Default Settings: Input: 1 to 5V Output: 0 to 20mA Tolerance: +/- 0.25% Maximum Input Setting Error: less than +/- 1% Maximum Output Setting Error: less than +/- 1% Maximum Temperature Variance: +/- 3% (Celcius) Response Time: less than 50ms Insulation Resistance: Minimum of 100 MΩ (Input/Output) Withstanding-Voltage: AC 2000V for 1 min Maximum Input Current: 90mA Operating Temperature: -10°C to 50°C Operating Humiduty: < 90% RH Storage Temperature: -50°C to 70°C Storage Humiduty: < 60% RH
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757