Home Page

Contact Us

My Basket

Checkout

PCX-4288 PCI Relay/Opto Input Card

Description

 
The The PCX-4288 is a 16-ch relay and 16-ch isolated digital input card for the PCI bus. Its sixteen on-board SPDT relays are ideal for applications such as ON/OFF control. Each relay is equipped with one red LED to show its ON/OFF status. The PCX-4288’s sixteen optically-isolated digital input channels are ideal for monitoring digital inputs in noisy environments or with floating potentials. Supplied with a DLL, an ActiveX and drivers for use with LabView and InTouch SCADA software.

 
Click to enlarge

New Lower Price

User Manual >>

 

 

  • 16 Relay Output Channels

  • LED indication of relay status
  • 16 Optically Isolated digital inout channels
  • Built-in internal DC-DC converter for use as a wetting voltage
  • Software programmable interrupt handling
  • Requires 2 off 837 screw terminal panel and cable
  • Visual Basic, C++ Delphi examples plus drivers for LabVIEW, InTouch and DAQFactory

 

Specifications

 

Relay Outputs

  • Contact Rating: 0.3A/120V AC,DC/1A 30V DC

  • Contact arrangement: Output channel 0 -3 are form C
  • Output channel 4-7 are Form A
  • Operating time: 5 mSec
  • Release time: 10 mSec
  • Expected life > 100,000 times (at 30V, 1A)

Environmental

  • Power requirements +5V 460mA (typical)

  • Operation Temp :0° C~50° C
  • Storage Temp :-20° C~70° C
  • Humidity :0 to 90% none-condensing
  • Dimensions :172 X 120 mm

 

Digital Input

  • Type: opto-isolated (PC-814)

  • Input voltage: DC 5-24V (0- 1KHz)
  • Input impedance: 4.7K ohm (or optional 47K ohms for +24Vdc input range)
  • Response time: 20u Sec
  • Isolated: 500v channel-channel / channel - Ground
  • Interrupt: Pos. or Neg. edge interrupt programmable (Ch #0,Ch #8)

Software

 
Included with each card;

  • Software Toolkit (DLL, ActiveX) for Windows 98/2000/NT/XP

  • Many Visual Basic, C++, Delphi etc. examples
  • Software Toolkit for Labview, Wonderware Intouch
  • DAQFactory Driver and examples

Control and monitoring software DAQFactory can now be used with up to 4 cards. DAQFactory can be used to create an opertor interface, with plant mimics, chart recorders, provide automatic control, PID loops, alarms and datalogging and reporting functions.

 

 

Accessories

 

837 Screw Terminal Board + Cable



 

 

 

  • Optional 837 37-way D-type to screw terminal board.

  • 1.8m Cable Included

 

Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757