Home Page

Contact Us

My Basket

Checkout

311 4-Channel PC104+ Frame Grabber


Description

 

The Model 311 is a low cost 4-channel PC104+ based frame grabber complete with a comprehansive software development for use with a wide range of operating systems and programming languages.

 

Product

 

 

 

  • High frame rate using the PC/104+ bus

  • Colour or monochrome: PAL, SECAM, NTSC, RS-170 CCIR compatible
  • Four composite video inputs or three composite and one S-video
  • Eight TTL I/O lines for camera control
  • Programmable AGC, hue, contrast, saturation
  • Optional enhanced SDK for Windows 98/2000/NT
  • Optional DOS and Linux drivers
  • Optional 311TA BNC Connection Panel

User Manual >>

Description

 

The Model 311 frame grabber converts video camera signals into digital data required for computer image processing and display. Up to four cameras may be connected to the board: four with composite video or three with composite and one with an S-video output. The 311 provides four digital input lines and four output lines to control camera focus, pan, tilt and triggering.

 

Frame Rate

Model 311 can transfer 30 frames per second with the supplied software. It supports a variety of digital formats including RGB24 and Y8 that are directly compatible with Windows bitmaps.

PC/104+ bus

Model 311 requires the PC/104+ bus.

Synchronization

The Model 311 uses special circuitry to achieve horizontal and subcarrier synchronization to incoming video.

It guarantees generation of the required pixel/line from a video source in which line length can vary by several microseconds. This circuitry allows the 311 adapter to quickly and accurately lock on to video signals, regardless of source. Since the technique is completely digital, the 311 can recognize unstable signals caused by VCR head switching and adapt the locking mechanism to accommodate the source.

Image scaling

Under software control the 311 adapter can independently scale the X and Y dimensions of the captured frame. Full-resolution video may be reduced to any size down to the size of an icon. A software selectable digital filter is available to minimize aliasing artifacts induced by scaling.

A/D Conversion

The 311’s signal processor uses two flash analog-to-digital converters; one for chrominance and one for luminance. Each A/D provides 2x over sampling of the camera signal. Over sampling, combined with analog anti-aliasing filters, significantly reduces the overall sensitivity to unwanted aliasing signals and enhances the 311’s digital filtering.

The 311 is capable of sending just the luminance data to the host’s image buffer. This feature speeds capturing monochrome images.

 

Connections

The Model 311 has a single BNC connector for a single camera. For multiple camera connection, use the 311TA. This is a small panel with 4 BNC connecftors which connects to the 311 video input connector

 

Software

 

The software development kit, SDK, includes a C-language sample program that allows capturing and saving colour and monochrome images. It illustrates the 611's scaling feature and shows how to call the included DLL from a C program. The supplied 32-bit DLL supports interrupts and multiple DMA buffers that may be scattered within the host's memory. The DLL supports capture directly into video memory and graphic overlays when using Direct Draw (only supported with enhanced SDK).

An optional DOS driver, x11DOS, includes a C++ application program.

A Linux driver is available from an independent source

 

 

Specifications

 

  • Capture rate - 30 frames/sec (NTSC, RS-170, CCIR), 25 frames/sec (PAL, SECAM)

  • A/D resolution - 8-bits for luminance, 8-bits for chrominance
  • FIFO size - 560 bytes (280 pixels)
  • Output resolution - 768 x 576 (PAL, SECAM), 640 x 480 (NTSC, RS-170)
  • Y bandwidth error -0.6 dB
  • Board size - 3.80" x 3.55"
  • Output format - Several
  • Input power - 5 volts at 280 mA
  • Bus structure - PC104+

 

 

 

Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757