Home Page Contact Us My Basket Checkout
PCX-2026 PCI Multifunction I/O Card
Description
The PCX-2026 - Low cost PCI bus multifunction card with analogue inputs/outputs, digital inputs/outputs and 3 counter/timer channels. Supplied with a DLL, an ActiveX. Drivers for use with LabView, InTouch and DAQFactory SCADA software.
User Manual >> Accessories >>	16 single-ended or 8 differential analogue input channels 12-bit analogue input resolution Auto-scanning channel selection Up to 110Khz A/D sampling rates Bipolar or unipolar input signals Programmable gain of x0.5, x1, x2, x4 Two 12-bit analogue output channels 8 digital output channels 8 digital input channels 3 independent programmable 16-bit counters Three A/D trigger modes: software, programmable pacer, and external pulse Integral DC-to-DC converter for stable analog power source DAQFactory LabVIEW and INtouch Drivers
Specifications
Analogue Input (A/D) Converter : ADS774 or equivalent, successive approximation type Resolution : 12-bit Numbers of Input Channel: 16 single-ended or 8 differential Input Range : (Software controlled) Bipolar :±10V,±5V,±2.5V,±1.25 Unipolar :0~10V, 0~5V, 0~2.5V, 0~1.25V Conversion Time: 8 m sec Throughput: 110KHz multiplexing (maximum) Analogue Input Over-voltage Protection: Continuous ±35V max. Accuracy: GAIN = 0.5, 1 0.01% of FSR ±1 LSB GAIN = 2, 4 0.02% of FSR ±1 LSB GAIN = 8 0.04% of FSR ±1 LSB Input Impedance: 10 Mohms Trigger Mode: Software, Timer Pacer, and External trigger Data Transfer Modes: Bus mastering DMA, Program control, Interrupt FIFO Depth: 2K words Analogue Output (D/A) Numbers of output channel: 2 double-buffered analogue output Resolution : 12-bit Output Range : Internal Reference: (unipolar) 0~5V or 0~10V External Reference: (unipolar) max. +10V or -10V Converter : DAC2815 or equivalent, monolithic multiplying Settling Time : 30 m sec Linearity : ±1/2 bit LSB Output Driving Capability : ±5mA max.	Digital I/O (DIO) Numbers of channels : 8 TTL compatible inputs and 8 TTL outputs Input Voltage: Low : Min. 0V. Max. 0.8V High : Min. +2.0V Input Load: Low Low: +0.5V @ -0.2mA max. High High: +2.7V @+20mA max. Output Voltage: Low : Min. 0V; Max. 0.4V High : Min. +2.4V Driving Capacity: Sink current : 24 mA ( Max. ) Source current : 15 mA ( Max. ) Programmable Counter Timer / Counter Device : 8254 A/D pacer timer : 32-bit timer with a 2MHz time base Pacer Frequency Range : 0.00046 Hz ~ 100K Hz. Counter : One 16-bit counter with a 2MHz time base Environmental Power requirements +5V 460mA (typical) Operation Temp :0° C~50° C Storage Temp :-20° C~70° C Humidity :0 to 90% none-condensing Dimensions :172 X 120 mm
Software
Included with each card; Software Toolkit (DLL, ActiveX) for Windows 98/2000/NT/XP Many Visual Basic, C++, Delphi etc. examples Software Toolkit for Labview, Wonderware Intouch DAQFactory Driver and examples Control and monitoring software DAQFactory can now be used with up to 4 cards. DAQFactory can be used to create an opertor interface, with plant mimics, chart recorders, provide automatic control, PID loops, alarms and datalogging and reporting functions.
Accessories
837 Screw Terminal Board + Cable	Optional 837 37-way D-type to screw terminal board. 1.8m Cable Included
Phone +44(0)115 925 8412 | Fax +44(0)115 925 9757